Psychonaut 0 #1 September 7, 2010 Check out the new features: http://www.goprocamera.com/support/hdheroupdate.phpStay high pull low Quote Share this post Link to post Share on other sites
LouDiamond 1 #2 September 7, 2010 Here is the direct firmware download link for those who don't want to give their name and e-mail to GoPro. http://download.goprocamera.com/GoProHDHERO_firmware.zip"It's just skydiving..additional drama is not required" Some people dream about flying, I live my dream SKYMONKEY PUBLISHING Quote Share this post Link to post Share on other sites
PhreeZone 15 #3 September 7, 2010 Hopefully now the stupid "is my camera on" questions will end by just turning it on it will record.Yesterday is history And tomorrow is a mystery Parachutemanuals.com Quote Share this post Link to post Share on other sites
howardwhite 5 #4 September 8, 2010 I followed directions to the letter and it didn't work. Now my GoPro doesn't work either. HW Quote Share this post Link to post Share on other sites
DSE 3 #5 September 8, 2010 QuoteI followed directions to the letter and it didn't work. Now my GoPro doesn't work either. HW Does it power up? If so, turn it on, remove the card, and let it sit til the battery dies. This should reset it. I don't know of any other way to reset the HD version. Quote Share this post Link to post Share on other sites
parachutist 1 #6 September 8, 2010 QuoteCheck out the new features: http://www.goprocamera.com/support/hdheroupdate.php We had a GoPro HD here that would freeze whenever trying to shoot photos or vids. I was about to send it in with RMA for repair, but figured why not try the update before shipping. New firmware is installed and now it works. Hopefully that's all it needed. We'll test it at the DZ next. Quote Share this post Link to post Share on other sites
howardwhite 5 #7 September 8, 2010 It does power up and gives me the beeps. But then nothing else happens. I have to take the battery out to power it off. I'm waiting for a support call from GoPro. Let you know how it works out. HW Quote Share this post Link to post Share on other sites
NickDG 23 #8 September 8, 2010 My GP HD isn't working either. I have to pull the battery out to get it to turn on, but if you turn it off you have to repeat that process to turn it on again. Also getting it into USB mode is hit or miss, mostly miss. I checked the GP HD support forum and there's more than a few folks with similar problems. And the firmware update didn't alter its behavior. I'm hoping for a RMA too. NickD Quote Share this post Link to post Share on other sites