New visor for old Oxygn?

[Surf 0]

I have an older Oxygn helmet (with the button release). It's in like new condition, except its 5.5 years old and the visor has crazed over.

is it possible to get a new visor made? I looked for replacements online but couldn't find any :(

I know Andre Petriese (now in Chicago?) used to make these for people out at skydive houston.

"Nothing is written"- T.E. Lawrence

[airgord 1]

Square2 has them.

[sdctlc 0]

Square one has them for $23 under the catalog-> full face Helmets -> down about 3/4 of the way.

This should be the one you need...

"I-3066737 OXYGN SKYLENS CLEAR SPARE 23.00 "

Also they note:
"Replacement Lenses
for Factory Diver, Carbon Fire and OXYGN Helmets

Please note: If your helmet was purchased prior to September 1994, replacement lenses are no longer available for those helmets."

Square One Catalog

Hope that helps

"He who Hesitates Shall Inherit the Earth!"

[skybytch 259]

The lens for the older Oxygn is the same as the lens for the current Oxygn and Oxygn A3.

Pretty much any gear store should have them.

[Surf 0]

thanks to all, don't know why I didn't see that in square ones cat..

"Nothing is written"- T.E. Lawrence

[wlie 0]

If you could find a place like Tap Plastics you could buy yourself some 1/8" polycarbornate sheet and make your own.

I did that and it cost me less than $4 for my Z-1.

My other ride is the relative wind.

[koz2000 1]

I just sold a lens to a guy with an older Oxygen (with the button up top). I used the a new lens but I had to cut a small section out of the rubber frame to allow it to pass the button. Other than that the new lens works fine.
D

______________________________________________
- Does this small canopy make my balls look big? - J. Hayes -