collier1234

http://www.justanswer.com/audi/65rqk-audi-a4-hi-looking-installation-instruction-replace.html Here is a link i just found that has pictures. Hopefully all that helps!

okay the front pads and rotors are very simple. First timers it might take some time to figure out how to put the new clips in the right way and figure out how to push the brake caliper in. If you bought a brake kit it should come with it all if not its not a big deal just dont bend them. If you dont have the right tools to push the piston in you can use a big pair of "pump Pliers" (google it if you dont know what im talking about) use an old brake pad and put it on the piston and squeeze the piston in but dont forget to open the brake resevoir cap. The rotor should be able to just slide off when you take the Brake Caliper off it. if its not held on by a nut and its stuck just take a rubber malet and hit it a few times to break it free. The caliper is held on by 2 bolts in the back, undo them and the caliper will slide off. There is a bracket on that with 2 "slide pins" When you take that off remember to clean and regrease those pins. This will help with smoother brake application. Remember how you took the old pads off and put the new ones on the same way. once you have the caliper off and the pads off you dont want to let it hang by the brake line, this might make it crack and thats a bad thing. you can take a wire and hang it up or just set it on the Control arm. Its a dirty job but very simple. Just take your time with it and take pictures if you have a bad memory. If you have any questions or there is something you are confused about feel free to message me. For anyone else if you need help with something on your car you can message me.

I hate when people do this. I feel like most of them do it just so people can look and see how "cool" they think they look. Makes me want to throw a rock at them. but there are bikes that are normally very loud. I have a 2008 ZX10R with a bunch of stuff done to it and with the exhaust i have it is very loud. I try to keep it as quiet as possible in neighborhoods just so i dont draw alot of attention to me since i am only 22. The best way i do it is i keep it in 2nd gear and putt around so its not screaming.

hahaha i love the look on the guys face when he gets smacked. i wonder what would have happened if they werent on camera!

I had the same problem with mine and this worked for me. Idk what it was but after i did this a while ago it worked and then it was stolen so now i have a Hero 3 and its much better

For all those skydivers out there that has a skydiving girlfriend or wife how much better is it then having one that doesnt skydive? there is a couple at my DZ that touch foreheads and kiss everytime they are about to jump out and it seems like the bond they share while jumping is way better then anything else. Whats your opinions?

2008 Ninja ZX10R.. K&N Race Filter, Power Commander 5-tuned to 185hp to the wheel, Slip on exhaust, Suspensions tuned for my weight. frame sliders. Nothing special but there are none around here that look or sound as good. atleast none that keep up for me to see or hear It wont let me attach the picture because its to big i guess.

does anyone know if there are any at skydive mesquite? that will be my new DZ soon.

Im not going up this weekend but next week i will be. i may just bring it up on the plane with me to see what it does then either give it to the pilot to bring back down or put it in a pocket. there are no markings on it that tell me feet or meters. guess i will just have to find out myself! thanks for the help!

So i just recently got a digitude altimeter. I dont know if it is in feet or meters. When it is zero out its at 0.0, below the screen it says X1000. If anyone knows anything about these can you help me out? thank you!

Your first jump isnt to bad. my first jump after level 7 wasnt to long ago. dont over think the jump before you go. my instructors told me to not do anything but control my fall and watch my altimeter. just remember to have fun and dont forget to pull!

do you have a link for that shop? I have tons of coveralls since i am a mechainc haha but i dont think they will let me wear them to fly haha i mean simply a work overall like a mechanic at a garage would wear; you can get them for real cheap and dont have to deal with the smelly ones from the dz.

do you have a link for that shop?

Wow, you only have 15 jumps and you're already looking to do some freefly...ok, why don't you just get a Liquid Sky suit then http://www.liquidskysports.com/freefly-suits you seem to love the trolls; do you always put up a 2nd account or do you team up!? What a minute,, this is the second time this week i was called a troll. let me explain and here's how i see it: So OP wants to do freeflying when OP hasn't even been licensed. I think OP would benefit from excelling first in belly flying then over to freeflying. What happens if OP cannot control a freefly position, would OP be comfortable transitioning into a belly fly? maybe he would but OP would fair a better chance if OP had SOLID belly flying skills. My comment to OP was sarcasm. Where I come from we can smell the noobs..and if such noobs come out flying suits like LiquidSky they better know their $#i!. this statement stands for itself of how well you THINK you know your shit. and a suit really has NOTHING to do with FF-skills.

Wow, you only have 15 jumps and you're already looking to do some freefly...ok, why don't you just get a Liquid Sky suit then http://www.liquidskysports.com/freefly-suits Thank you for the link! I will check them out! I am absolutly ready for freefly. I pick up on things very quick and i learn fast (especially if my life is on the line) lol I have a video of me and one of my JM's Doing a doing a cirlce face to face i will see if i can post it. Nothing to special but for me a big achievement lol