What is the best way to wash the rig (container)!

[matereti 0]

Hi everyone,
Have a Javelin J1 and I want to wash it! What is the best way to do it?
Thanks & Blue ones
G>

[RMURRAY 1]

Quote

Hi everyone,
Have a Javelin J1 and I want to wash it! What is the best way to do it?
Thanks & Blue ones
G>

this has been discuss many times. I use the instructions on the RWS site - it works well. Here it is...

Washing Your Vector
Over the years we've seen some extremely dirty Vectors! We've found that many people are unsure how to get their container clean. For that reason, we have put together the following instructions on how to make your Vector smell and look good again. The best way to wash a rig is the "good old fashion way" with slightly warm water and Woolite. Use a big tub; let the rig stay in the soapy water 4 hrs. Occasionally swish the rig around in the tub to loosen dirt. Drain soapy water, fill tub with clean water, and swish rig around until
the clear water becomes soapy and cloudy. Drain tub and repeat until all soap and dirt residue are gone, usually in 3 rinses. Let the rig naturally dry, without direct sunlight. We usually allow a small fan to blow air past it to speed up the drying process. We do not recommend using a washing machine. Extended agitation in a washing machine could have negative effects in the long run. This also
requires you to wrap the heavy hardware to minimize damage to the machine.

[beowulf 1]

The best way is to pay someone else to do it. Preferably a rigger.

[phoenixlpr 0]

By doing at least a search before that. It was discussed several times here already.

[Mostly_Harmless 0]

Would the manufacturer clean the rig if you sent it to them?

_________________________________________
www.myspace.com/termvelocity

[bodypilot90 0]

i know mirage will. I had the reserve loop mod and had them clean it.