G4 Line Stows

[Muppetdog 0]

On my G4 bag (probably like every one elses's) is has it where you stow the last loops of line down 4 sets or bands on ether side to the last one in the middle (on my canopy it takes 4 bands on each side because the line is long. Mirage said that is ok). My question is, how tight should the last stows be? I am using small bands but they I don't know how tight they should be. They might seem a little loose.

Thanks,
MD

[KrisFlyZ 0]

I use the small bands and yes they seem loose but they have worked fine for me.

[diablopilot 2]

Quote

My question is, how tight should the last stows be? I am using small bands but they I don't know how tight they should be. They might seem a little loose.

I like my stows a bit more snug thant that. I find a large band doubled works well....

----------------------------------------------
You're not as good as you think you are. Seriously.

[headoverheels 291]

You can install the rubber bands in a way that makes them tighter. See the TubeStow(tm) instructions.

http://www.skysystemsltd.com/images/TUBESTOWinstructions.pdf

It may be easier to install them using a pullup cord.

[Muppetdog 0]

Here is another question for you G4 guys. How much force does it take to pull your pin. What is the best way to measure that? do you measure it with the pilot chute in the poutch and the flap over the pin?

MD

[GravityGirl 0]

Quote

Quote

My question is, how tight should the last stows be? I am using small bands but they I don't know how tight they should be. They might seem a little loose.

I like my stows a bit more snug thant that. I find a large band doubled works well....

What he said. I use all large and double wrap. Nice and tidey, nice and snug.

~~~~~~~~~~~~~~~~~
Peace and Blue Skies!
Bonnie ==>Gravity Gear!

[grega 0]

Quote

Here is another question for you G4 guys. How much force does it take to pull your pin. What is the best way to measure that? do you measure it with the pilot chute in the poutch and the flap over the pin? MD

Close the rig completely with the flap over the pin, then pull on the bridle perpendicular to the rig that is lyin on the ground. If you can raise your rig it's too tight.

"George just lucky i guess!"

[KrisFlyZ 0]

Quote

Quote

Quote

My question is, how tight should the last stows be? I am using small bands but they I don't know how tight they should be. They might seem a little loose.

I like my stows a bit more snug thant that. I find a large band doubled works well....

What he said. I use all large and double wrap. Nice and tidey, nice and snug.

Changed my outer two rubberbands on the front and all the rubberbands in the back to the large ones and I now double wrap. Thanks for the info JP and GravityGirl.

Kris.