696GrocuttT

I've written an app that can draw speed / altitude graphs of jumps. I recently got a protrack 2 and I'd like to add support for reading the log files it creates. The snag is I haven't had a chance to jump it yet, and will all the virus problems at the moment, I don't think I'll be able to get to the DZ any time soon. If anyone has some logs from a protrack 2 could send me so I can start adding support to my app, I'd be very grateful. If you plug the protrack into a computer via the micro-usb socket on the side you should see the log files. At least this way I get to do something at least slightly skydiving related while I'm on lockdown. Thanks Tom

I've created a skydiving app which uses your iPhone to automatically log your jumps. I've recently added some new features that I need help with testing in a Beta version of the app. Unfortunately all of my usual testers have gone into hibernation for the winter, so I'm looking for volunteers who either live somewhere they can still jump without freezing their tail feathers off, or are going on a jumping holiday somewhere nice and warm. All I need you to do is use the app to record your jumps and email me the logs at the end of the day so I can check if everything is working ok. It's also helpful if you let me know if you spot anything that's wrong (e.g. an incorrectly reported exit height). There are a few other things to bear in mind: * For safety I'd recommend you have at least 200 jumps, or as a guide, whatever the criteria are for jumping camera in your country (whichever is greater). If in doubt talk to an instructor. I'm being cautious here: you don't need to touch your phone after take off - just have it stashed safely in a zipped pocket. * Your iPhone must be running iOS 9.3 or later. * The accuracy of the app is limited on the iPhone SE and the 5s and below. This is because it has to make do with GPS and can't use the altimeter built into newer iPhones. * I don't make any money from the app, so I can't pay you for helping to test it, but I will add your name to the Acknowledgements page. * The logs I need will include your location, altitude, etc from whenever the app was in "Record" mode. However if you only switch "Record" on when you're at the DZ, I'll only get to see the location of your DZ and where you were flying. The app also makes it easy to choose which days to email me logs for, so it's easy to leave stuff out if you don't want me to see anything. * I'm working on adding support for the BadELf family of bluetooth GPS units. This will allow much more accurate data and higher speed sampling. If you have one of these units I'd really appreciate your help testing this feature. * I’d love to hear your feedback and any suggestions you have for additional features. To take part, you’ll need to install the app through Apple’s official TestFlight system (see https://developer.apple.com/testflight/). If you're interested, just PM me your email address and I’ll send you an invitation. Thanks in advance, Tom

Just got my hands on it. Its too big to post (just under 2.5meg), If anyone wants a copy send me your email address and I'll send it to you. Tom

What I can't figure out is why the bulletin isn't easy to find on the paratec web site (I still haven't found it on there site at all). The same goes for the BPA web site. I've also just heard from a friend (the same rigger that got me a copy of the paratec bulletin) that a similar bulletin has come out for the PdF containers. Haven't seen anything about this anywhere else, but she was spot of with the paratec mod... Tom

After a bit of a wild goose chase I managed to track down an english version. Strangely the BPA's technical officer told me on the phone that he hadn't heard of the bulletin. Yet when I talked to the UK dealer he told me that he'd been sent it by the BPA!!! I read the following in the bulletin:- Presumably if Airtec is ordering this it well affect other containers as well as the NEXT, but the only other container I've heard about this mod is the Mirage. Anyone heard of other containers being effected. Tom

I've got a paratec NEXT container, and I've heard that there is a service bulletin out to move the cypress cutter (similar to the mirage mod a few years ago). But I can't find any details on it. The only SB I found on the paratec website was about reserve pins from a few years ago. I've googled a few times, looked over the BPA website, and a few others but can't find anything. I've also talked to a few friends that remembered seeing something recently but can't find the details Has anyone heard about this service bulletin, or know where I can get the details??

Well of course WL and manoeuvres play a part. Which is why the WL is given on the www site I posted. I didn't mention the specifics in my post for brevity. The jumper was Luigi Cani, and they were trying to get it to fire so they undoubtedly tried several different types of approach. Could not or would not?? You were asking them to put there neck on the line. If you read the label/manual for any bit of skydiving equipment it usually says the manufacturers are not responsible for any loss of life etc. So if they did state that you could not get it to fire on your VX, and it did... I doubt you'll find anyone in this industry that would put there neck on the block in such a fashion. Besides the person you spoke to would probably not be able to speak for the company, even if they had legal representation present.

Check out the following page http://cypres.cc/Sites/englisch/Skydiving_Small_Canopies.htm Basically they are saying publicly that you can get a cypres to fire, but as far as they know you need a VERY extreme canopy (ie VX 46) to do it. There results from the VX 60 didn't cause it to fire. So yes they knew there was a problem, and they stated that on there www site. But they didn't think that it would cause a problem for canopy pilots. I'm sure they are as surprised and shocked about what as happened as everyone else. At the end of the day skydiving is very risky, its not possible to eliminate this risk, but it can be managed. Hell I'm sure there are people out there that jump because of the risk. I don't think we should jump down airtec's throat because of this incident, especially since they have time and time again proved how committed to this sport they are.

Is that list complete. Apart from thomas sports not being on the list. I can't the relative work shop

I was under the impression that it was TSO'ed and JTSO'ed. I own one and will check tonight. But I'm sure I remember seeing something about it being TSO'ed on the label on the reserve risers.

I don't think its the same. Again I could be wrong about this but I'm pritty sure there isn't a lot of force that goes through the container itself (and the webbing in it). If there were why would the laterals be designed to go horizontally from the bottor of the container to the MLW. Any comments from the riggers out there. I'm sure most if not nearly all of your weight is carried by the MLW, hence the name.

I could be wrong about this, but I would have thought that the stress on the leg strap hardware is about half that of the MLW adjustment. If you think about it the force you put on the leg strap will be divided between the 2 ends of the leg strap that go into the hip ring (if you have one). The hardware is only on one of these. I'm not sure how the load on the webbing/hardware affects that wear rate. But I do know that I've seen lots of wear on both adjustable MLW's and leg strap hardware.

The next and the zerox are actually both made at TSE in the UK. Paratec make the canopies in germany but sub-contract the manufacture of the NEXT to TSE. If you compare a next/zerox to the tear drop superfly you will notice that they are pretty much exactly the same design (except the teardrop is a pop top of course). I've had my NEXT for about a year now. Apart from a slight problem with PC hesitation due to the kill line shrinking I had no problems with it. They did a really good job of making it fit the measurements, its seriously comfortable!!!

For my 100th I did a hybrid with me and another guy (also his 100th) in flat with a friend hanging from our chest straps in stand. Just get lots of video.

I don't know how common this is but I had serious problems hearing my protrack when I used with a protec. It was real easy to mount it but the wind noise was loud enough to completely drown out the beeps. I tried lots of different ways of mounting it some with better results than others. But the best I got was being able to hear it about 50% of the time.