shift 0 #1 February 29, 2016 Has anyone configured their flysight as an audible altimeter like an N3A? The beta firmware supports voice output, and altitude triggered alarms, but I'm having a problem getting it to go off at the correct altitude. The alarms are in meters, so I converted to feet, and set the DZ ground offset, but the alarms are still way off. Quote Share this post Link to post Share on other sites
bucketlistpilot 1 #2 March 2, 2016 Straight from my config file ; WARNING: GPS measurements depend on very weak signals ; received from orbiting satellites. As such, they ; are prone to interference, and should NEVER be ; relied upon for life saving purposes. ; UNDER NO CIRCUMSTANCES SHOULD THESE ALARMS BE ; USED TO INDICATE DEPLOYMENT OR BREAKOFF ALTITUDE.Ian Purvis http://www.loadupsoftware.com LoadUp DZ Management App [email protected] Quote Share this post Link to post Share on other sites
DHemer 0 #3 March 2, 2016 Its probably good enough for indicating entry and exit gates in a performance competition but more than that you are asking for trouble. Quote Share this post Link to post Share on other sites
shift 0 #4 March 2, 2016 I will also be using a dytter and wrist alti. Thanks though. Quote Share this post Link to post Share on other sites