0
JRock

How do you reset a ProTrack?

Recommended Posts

Are you resetting for altitude calibration purposes? If so, go into the "ECO" mode screen, press both buttons; keep them pressed until the numbers count down to 0. The release; it will turn itself off. Then you're done.

Nick

"For once you have tasted Absinthe you will walk the earth with your eyes turned towards the gutter, for there you have been and there you will long to return."

Share this post


Link to post
Share on other sites
Preset each of the three warning
altitudes in the selected Warning
Memory Bank to “100“.
Start setting the 3rd warning altitude,
then the 2nd warning altitude, and finally
the 1st (highest) warning altitude.
Go to ”LOGBOOK DEL” and
press and hold Mode.
While holding Mode, press Set
and keep it pressed
while the display counts down from
”500” to ”0”.
2 beeps will sound when the unit has
deleted the logbook.
"Dancing Argentine Tango is like doing calculus with your feet."
-9 toes

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0