Mirage G4 and Crossfire2

[Diezel 0]

There's a Mirage G4, size M4 with PDR160 and Crossfire2 149. It seems a little loose to me when I compare it to my current rig, which is certainly a 'brick'. What do you guys think of this combination? Is it safe?

I did write to Mirage, they haven't replied yet. I'm just collecting opinions at this point.

Thanks!

[Jeffrey 0]

Normally we match 169 Crossfire with M4’s, so the 149 would be considered 1 size under and is more intended for the M2 or 3. One size under is ok, just that much softer and that much less room for additional down sizing.

Jeff

[damion75 0]

One opinion might be that a highly elliptical canopy loaded at 1.4 is quite an aggressive choice if your profile is up to date, but I imagine that this is something you will have already discussed with your S&TA...

***************

Not one shred of evidence supports the theory that life is serious - look at the platypus.

[Diezel 0]

Thank you, Jeff, and thank you Damion75 for your concerns

[CrazyAl 0]

http://www.miragesys.com/DesignOrder/SizingGuideByContainer.aspx

The M4 holds a PD 160 Snug, and a 143 is a Meduim fit.

The main tray is designed to hold a 159 medium, and a 169 snug.

The reserve is a snug fit, but a 149 will be a little soft after it's been packed. I had my Stiletto 150 in a G3 M4 before I bought a G4 M1. I had to have the closing loop as short as it could go to feel safe. If your really concerned about it Contact Mirage and ask.

[Diezel 0]

Thanks! It doesn't feel as snug as I'd like it to be, but I'm comfortable with it now. I think it's snug and safe enough. I'm just not trying too hard to squeeze all the air out of the canopy, makes my life easier