THERatBoy 0 #1 April 4, 2006 just changed cutter on vigil. anyone got tricks to closing damm thing back up? i thought getting screws back in cyp was a pain. life is to short not to try almost everything once. Quote Share this post Link to post Share on other sites
LouDiamond 1 #2 April 4, 2006 From the owners manual. Replacing the cutter after activation is a simple and fast process that can be performed quite easily by your rigger or your official dealer. 1. Press one time on the push button to have“Hello” on screen. 2. Then open the box using the supplied Hex key. (hexagonal key # 5). 3. Do not unplug the Power Pack connector(Vigil must stay powered). Do not put traction on the battery wire. Partially unscrew the printed circuit fixing screw with three complete turns only. Do not remove the screw from the printed circuit board. (Do not remove the printed circuit board from the case.)* By pushing the two connectors upwards it is possible to lift the printed circuit slightly. Do not remove the printed circuit from its housing.Any alteration of the hologram-seal glued between the printed circuit and the top case will void the warranty. Free the cutter connector and insert the newcutter connector.Check that the connector is correctly positioned(Cutter, LCD Unit) and tighten the printed circuit fixing screw. Make sure that the battery’s connecting wires are correctly positioned and they do not hinder the box from closing.Close the box and tighten the screw with Hex key # 5. (*) Do not remove the printed circuit from housing; doing so will void warranty."It's just skydiving..additional drama is not required" Some people dream about flying, I live my dream SKYMONKEY PUBLISHING Quote Share this post Link to post Share on other sites
jumper03 0 #3 April 4, 2006 you'll have to forgive him.... he's a master rigger.... Scars remind us that the past is real Quote Share this post Link to post Share on other sites
THERatBoy 0 #4 April 4, 2006 just a title as u well know. ass....thanks for the help.life is to short not to try almost everything once. Quote Share this post Link to post Share on other sites
THERatBoy 0 #5 April 4, 2006 thanks didnt help.life is to short not to try almost everything once. Quote Share this post Link to post Share on other sites
slotperfect 7 #6 April 4, 2006 Dayum! Three posts in 3.5 years! That's like turtles @#$%ing! What's up, Senor Raton? It's good to see you posting here. Call me at work tomorrow -I have good contact info for Vigil folks in both Belgium and in the US.Arrive Safely John Quote Share this post Link to post Share on other sites
THERatBoy 0 #7 April 4, 2006 yayaya i know. call u later. i did get it. once again u have to stroke it not poke it. the damm thing just fell together. works like a charm. life is to short not to try almost everything once. Quote Share this post Link to post Share on other sites
slotperfect 7 #8 April 4, 2006 Next time wait until all of the Red Bull and Cow Tails are out of your system. Hey - read your PMs.Arrive Safely John Quote Share this post Link to post Share on other sites
