RIGGER
Members-
Content
637 -
Joined
-
Last visited
Never -
Feedback
0%
Content Type
Profiles
Forums
Calendar
Dropzones
Gear
Articles
Fatalities
Stolen
Indoor
Help
Downloads
Gallery
Blogs
Store
Videos
Classifieds
Everything posted by RIGGER
-
Hi The tapes were cut with a hot knife - you can see it. Does the hot knife cut work was made as should ? hard to tell. I wonder what will be the Mfg. answer on that. HAPPY NEW YEAR !!!
-
Hi During inspection of a main canopy I found a well torn line attachment tape which holds an upper steering line but it could be at any line attachment. A report was sent to the Mfg. Tip: inspect the main canopy as well & look at the attachment tapes when packing the main - easy to see. Please look at the photo. HAPPY NEW YEAR !!!
-
PRECISION'S SB111214 FOR XAOS27 CANOPIES LINE TRIM
RIGGER replied to RIGGER's topic in Gear and Rigging
-
PRECISION'S SB111214 FOR XAOS27 CANOPIES LINE TRIM
RIGGER replied to RIGGER's topic in Gear and Rigging
-
Hi This is NOT the first time it happened - DO NOT use it at all !!! I never used that needle for that but I have a finger trap wire tool made from very thin (small diameter piano wire) into a wood handle. Works great. HAPPY NEW YEAR !!!
-
PRECISION'S SB111214 FOR XAOS27 CANOPIES LINE TRIM
RIGGER replied to RIGGER's topic in Gear and Rigging
Hi Please find enclosed the link to PRECISION'S SB111214 - TRIM CHECK FOR XAOS27 SERIES CANOPIES MADE BETWEEN OCT.2010 & APRIL 2011 http://www.precision.aero/servicebulletins.htm FYI HAPPY NEW YEAR !!! -
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
Hi Drogue release at about 2000' was the main reason for that fatality. The main question is WHY going so low & if a TI reach that point from any reason -THE RESERVE RIPCORD must be PULLED ! Thanks -
Do MARD Components require TSO Certification?
RIGGER replied to JohnSherman's topic in Gear and Rigging
-