0
neandertal

CX-12 & CX-100 w/o audio file on Sony Vegas

Recommended Posts

Hi guys,
I'm having trouble with my new set up. My Sony Vegas 9 Platinum just stopped to import audio files while I'm shooting videos on stereo mode. The same clip plays normally on ULead, CX-12 or Window Media Player but the audio file does not appear on my S.V. time line. I shot a few videos in 5:1ch this week and now it does recognize the audio.
Let me add more details: This SV is original and has been installed in another computer in my actual DZ. Guess what? One of our CM just got his CX-100 and the DZ computer with this SV does not recognizes his audio as well. We've tried to switch his CX-100 to 5:1ch but we could not find this option. I guess it's not available...
We are both shooting SD. I didn't change any SV setting on my computer before it happened. :)
So, what's going on? Why does my SV is not interacting with its counterparts?

No Drogue, no JUMP!!

Share this post


Link to post
Share on other sites
Yes, it is or at least I think so.
I bought it on EBay, from an EBay store. The box came sealed, CD and 2 manuals, Sony Creative Software / Product Overview and SN and registration #. The seller mentioned something about merchant version or merchant unit. I can't remember...
One more detail: on the very bottom of the box, there is a squared area at the right hand side of Sony's name and address that was peeled off carefully.

This is what I see when I open a new project: Sony Vegas Platinum 9.0 version 9a (built 85)

No Drogue, no JUMP!!

Share this post


Link to post
Share on other sites
Hi Doug

I copied some mpeg video clips from neandertal's CX-12 and it created the following exception that crashed Vegas everytime:

Pics attached, here's the full text from the box:

Vegas Movie Studio 9.0 TRIAL
Version 9.0b (Build 66)
Exception 0xC0000005 (access violation) WRITE:0x5020000 IP:0x24A02BE1
In Module 'mcdddec.dll' at Address 0x24A00000 + 0x2BE1
Thread: AsyncPreroll ID=0xAB0 Stack=0x521F000-0x5220000
Registers:
EAX=00003920 CS=001b EIP=24a02be1 EFLGS=00010202
EBX=12b750e0 SS=0023 ESP=0521fe4c EBP=00000000
ECX=00000565 DS=0023 ESI=05020000 FS=003b
EDX=00000000 ES=0023 EDI=00000006 GS=0000
Bytes at CS:EIP:
24A02BE1: 66 89 0E 83 C6 02 4F 75 f.....Ou
24A02BE9: 9A 8B 7C 24 10 8B 44 24 ..|.D$
Stack Dump:
0521FE4C: 12B7ECF4 10C80000 + 1EFECF4
0521FE50: 0501D120 04D20000 + 2FD120
0521FE54: 0005F8E0 00030000 + 2F8E0
0521FE58: 12B60048 10C80000 + 1EE0048
0521FE5C: 00000006
0521FE60: 24A01868 24A00000 + 1868 (mcdddec.dll)
0521FE64: 00000218
0521FE68: 00000565
0521FE6C: 000007E0
0521FE70: 07EE0020 07EE0000 + 20
0521FE74: 0002D120
0521FE78: 0000BB80
0521FE7C: 0501D120 04D20000 + 2FD120
0521FE80: 00000543
0521FE84: 0005F8E0 00030000 + 2F8E0
0521FE88: 23206DF6 23200000 + 6DF6 (mcmpegin.dll)
> 0521FEBC: 23205977 23200000 + 5977 (mcmpegin.dll)
> 0521FEDC: 7C802600 7C800000 + 2600 (kernel32.dll)
> 0521FEE4: 33BBA3D7 33BB0000 + A3D7 (mcplug.dll)
> 0521FEEC: 33BBA440 33BB0000 + A440 (mcplug.dll)
> 0521FF0C: 0068C63B 00400000 + 28C63B (VegasMovieStudio90.exe)
0521FF10: 0A32E7A4 09E00000 + 52E7A4
0521FF14: 00000000
0521FF18: 00000000
0521FF1C: 04FF0000 04D20000 + 2D0000
> 0521FF48: 00691423 00400000 + 291423 (VegasMovieStudio90.exe)
0521FF4C: 00000008
> 0521FF50: 00AF8148 00400000 + 6F8148 (VegasMovieStudio90.exe)
> 0521FF54: 00AF8160 00400000 + 6F8160 (VegasMovieStudio90.exe)
0521FF58: 00000002
0521FF5C: 00000000
0521FF60: 00000000
0521FF64: 00000000
> 0521FF80: 00AF88E0 00400000 + 6F88E0 (VegasMovieStudio90.exe)
0521FF84: 00000020
0521FF88: 00000000
0521FF8C: 00000001
0521FF90: 80004001
> 0521FFA8: 00857848 00400000 + 457848 (VegasMovieStudio90.exe)
- - -
0521FFF0: 00000000
0521FFF4: 006911E0 00400000 + 2911E0 (VegasMovieStudio90.exe)
0521FFF8: 01F3AE00 01E60000 + DAE00
0521FFFC: 00000000

I am using the trial version of Vegas 9.0
I did not register any mpeg encoders seperately from the Vegas trial registration.

I do not think I have any third party decoder packs installed.

any ideas?
thanks
Sam

PS - the mpeg files play just fine in Real Player.

Share this post


Link to post
Share on other sites
outside of telling you your mainconcept encoder/decoder is causing a problem, I can't.
Since it's a trial, there could be issues. There may be other codecs on your system (for instance, if you loaded the K-Lite codec pack, that'll kill main concept)
Beyond being able to read that in the crash code, I don't have a clue.

Share this post


Link to post
Share on other sites
thanks, that's a start

I would think the trial version should work, why would I go and buy software if the trial version doesn't work properly?

Is there any remedy you could suggest, i.e.

How do I re-install the main concept encoder/decoder?

How can I make sure I get rid of any other codecs that could affect main concept?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0