mattsplat 0 #1 December 7, 2004 Does anybody have any info if at all possible on scanning in a property survey that will scale out. My main purpose is to figure out size of area on irregular lots and also to used blocks for time saving on permit apts. thanks again mattsplat Quote Share this post Link to post Share on other sites
mindway69 0 #2 December 7, 2004 What do you need to know? I'm really good with AutoCAD R14-2005. If you are asking how to scale the scan once you have scanned it, I would suggest scaling it with a reference. What that means is scan the drawing, bring it in with the image command, type scale and select the scan as an object, then type R for reference. Then you can click two points of a distance (like a dimension on the scan or a setback that you know is a certain distance) and hit enter. Then you enter what you want that distance to scale out to (the correct setback or distance). If this isn't what you mean, feel free to PM me. Good luck. Quote Share this post Link to post Share on other sites