juan 0 #1 January 8, 2007 Hi there, looking for tips, what to check when you buy a used singer 7-34..? Quote Share this post Link to post Share on other sites
masterrig 1 #2 January 8, 2007 QuoteHi there, looking for tips, what to check when you buy a used singer 7-34..? ___________________________________ I would go for a 7-33. The 7-33, has a larger bobbin. That is about the only difference. Look for things that you would look for in any other machine. Namely, smooth operation and a good hook. Look for any cracks in the case and any severe wear. Some, have really been put through some rough use. A good table and stand as well as the motor. Sometimes, a bit of re-finishing may be necessary on the table tops. Hope, this helps. Chuck Quote Share this post Link to post Share on other sites
CReWLL 0 #3 January 9, 2007 A sloppy thread take-up lever is an easily accessed indication of general wear & tear Quote Share this post Link to post Share on other sites
masterrig 1 #4 January 9, 2007 QuoteA sloppy thread take-up lever is an easily accessed indication of general wear & tear ______________________________________ Good point! Chuck Quote Share this post Link to post Share on other sites
JerryBaumchen 1,064 #5 January 9, 2007 Hi juan, If you are looking for a Class 7 machine and do not a have a specific one in mind, this guy has three in his shop for sale: Joe Payne 3427 NE 72nd Avenue Portland, OR 97213 Phone) 503-284-7290 email) [email protected] HTH, Jerry Quote Share this post Link to post Share on other sites
juan 0 #6 January 9, 2007 Thanks a lot fellows, Jerry, I will keep the info handy thk's... Quote Share this post Link to post Share on other sites
