0
jumpwally

Picture Scan Help Desk !

Recommended Posts

Hey all, i've found this site to be the best opinion based info desk available. I want to scan some exsisting pics, which format will get the best results for reprinting? bitmap, jpeg, etc.....thanks in advance
smile, be nice, enjoy life
FB # - 1083

Share this post


Link to post
Share on other sites
Any format will work fine if the resolution is high enough. Jpeg isn't necessarily the best as far as quality goes, but it will work fine and keep the file sizes reasonable. You won't be able to tell the difference in format after printing.

Dave

Share this post


Link to post
Share on other sites
When you say reprinting I'm guessing your mean either from a destkop inkjet printer or reprinting in a magazine. For either one a jpeg scanned at 600 dpi will yield good results. Don't apply any compression to the jpeg.

Edit: Was thinking of another print method. 300 dpi is fine.
Muff Brother #4026
Loco Zapatos Rodriguez
SCR #14793

Share this post


Link to post
Share on other sites
Quote

A little more info would help I guess....I am going to scan 40 replica SuperBowl tickets and then send them to the photo print shop....



Ok, a few questions.
Are you scanning individual tickets and then assembling them into a larger image or is the print shop doing it?

Do you know how the print shop is producting the final design? Is it a single print or multiple prints?

I'm guessing the replica SuperBowl tickets are printed already. Correct?

One thing to consider is that when you scan an already printed image you should use the descreen filter if available. This will help to take out the screen pattern that is done with offset printed images. Eg: magazines.

If the print shop is producing the image via offset printing then you will need to scan at a resolution 2x the lpi they print at which is typically 133lpi. Therefore 266 dpi is ideal. However if you are wanting the tickets to be printed at a larger size than they originally are, you will need to make sure you scan at the appropriate magnification. Don't scan and then enlarge the image afterwards. Do it while scanning. Find out what file formats the print shop accepts. An uncompressed TIFF file is best for most print shops unless they specify otherwards. Hope this helps.
Muff Brother #4026
Loco Zapatos Rodriguez
SCR #14793

Share this post


Link to post
Share on other sites
Quote

600 dpi will yield good results.



Unless you're cropping in or enlarging for a billboard, in practice 300 dpi is the highest resolution you need. Anything higher you're just wasting space on your hard drive. The print shop will probably be printing around 225dpi.
but what do I know

Share this post


Link to post
Share on other sites
Quote

Quote

600 dpi will yield good results.



Unless you're cropping in or enlarging for a billboard, in practice 300 dpi is the highest resolution you need. Anything higher you're just wasting space on your hard drive. The print shop will probably be printing around 225dpi.


You're correct. I got the numbers all kind of screwed up in my head and was thinking gravure. My bad. :| Typical lpi for offset printing is 133 lpi so minimum scan resolution should be 266 dpi. Scan at 300 dpi and you should be fine.
Muff Brother #4026
Loco Zapatos Rodriguez
SCR #14793

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0