Matter Wingsuits

[bennord 0]

A friend has asked me how to hook up the cut away on a Matter Wing suit! I can hook it up to work but the trouble the cut away has 2 cables coming from it and I don't know what the extra do or where they are supposed to go. Does anyone have a manual or picture on how these cables should be routed? Not even sure if the handles that came with it are original.
Any help here would be appreciated!

[piisfish 135]

My guess is that it is like the older S-Fly models.
The short cable is for the upper arm, the longer cable for the lower arm. There should be a channel to insert the longer cable which ends around the elbow bend.

Is that what you were looking for ?
You were talking about the wing cutaway right ?

scissors beat paper, paper beat rock, rock beat wingsuit - KarlM

[bennord 0]

Hi there,
That's what I initially thought but there is no channel for the longer cable.
Here are some pictures to relate!

[piisfish 135]

The last picture would be the best way to rig it then. Like that you also get a release of the upper arm without needing to pull the handle too far.

scissors beat paper, paper beat rock, rock beat wingsuit - KarlM

[birdynamnam 28]

explained in the sfly manual: http://www.bkpc.co.uk/media/6745/s-fly-expert-userguide.pdf

[bennord 0]

Thanks for that, I might sew a couple of guides in there to tidy the cables up. It looks very similar to the S-Fly that someone has added a manual for. Thanks again for responding to my message!

[bennord 0]

Hey mate, thanks for sending the manual through, it helped heaps. Going to sew a couple of cable guides on to tidy it up a bit! Thanks again.