lewmonst

Thank you for that...

Question though, is "8 feet" too much of an assumption? Or are you basing this on a focal range to cover most skydiving scenarios?

When I used to shoot more manual focus, I would set my distance for about 3 or 4 feet for tandems, 5 or 6 for 4way and up to infinity the bigger the group got.

I'm actually getting good enough results with my current lenses and AF AIServo that I haven't gone back to manual focus for a while now.

Just wondering, thanks!
Lew

Quote

Well originally I was going to do AFF at Elsinore but I've decided to do the "A license in a week" program at Spaceland, so I won't have time in between FJC and the following jumps to hit the tunnel, so I am trying to get as much time now so that I minimize the chances of a repeat during the week since time will be pretty tight.

Even though I haven't started AFF yet, I still feel like practicing in the tunnel with proper feedback, body positioning, practice pulls, etc. will be quite helpful...

You can get your A-license in a week anywhere...

The reality of that happening is more dependent on weather and if planes are flying. If you're a SoCal local, why not stay here to get your A-license in Perris? You can go in the tunnel in between jumps if you want or need to. And there's jump insurance: If you do tunnel time with a coach, you're gauranteed to pass the next AFF level, if not, the repeat jump is free. There's no 2 tandem pre-requisite so you don't have to waste money on another tandem. 2 minutes in tunnel is included with the FJC. Save money on travel. Perris flies loads every day. The weather in Perris is the best in the country. And you get free debrief video on each jump from Level 4-8. There's a cheap bunkhouse on the dz if you want to crash close. Oh, and a restaurant, bar, pool, big gear shop... Why go to Texas?

Thank you. Ha... yeah, it was quite traumatizing getting my head wrapped. I was at Wes's shop by myself, and I could just barely breathe out of my nose. The rest of my head, face, chin and neck were wrapped so tight in the plaster I couldn't move my chin enough to swallow the saliva in my mouth. I kept telling myself to stay calm. Wes would disappear for 10 minutes, and I couldn't scream or anything. I wondered what if he didn't come back or what if my nose got stuffed up, as it often does, and I couldn't breathe. I forgot to wear my iPod like he suggested, so I was just sitting there in the dark for 40 minutes or so until he started sawing my head in half... Unique experience, hope I never have to do it again.

I told him I was glad I didn't know how bad it was going to be going in, because I might not have done it. He said he's had a few well-known camera flyers freak-out and make him take the plaster off and start over... Wes had many funny stories...

Awesome! Can't wait to see your progress. I'm happy to have a Wes CCM. I think if anything ever happened to it, I'd like to try to make one myself. Let's hope I don't have to do that. I would certainly like to learn how to do it and get skilled with the fiberglass. Maybe someday be able to make them for others....

Good luck!

Quote

Can anyone post picture/s of a camera mounted to a hand cam glove? I kind of see how you'd do it. The camera goes into a housing, said housing needs the mounting crap cut off. Then drill holes and super tack the housing to the glove?

Why make it so hard? No drill, no dremel, no super-tack, no glue... just some 550 chord.

Yep, a little 550 chord goes a long way, and I didn't have to dremel, sew, or glue anything. Just make sure the knots won't come undone.

Edit to add: Oh yeah, and, with my macgyver rigging, you don't see my arm in the video. Whereas you do with the specially designed gloves.

I was intentionally not explaining it, hoping those that cared would already know or make the effort to look it up.

Probably set expectations too high in that sense.

A "YES" vote would reject the new law and continue to prohibit same-sex couples from marrying.

A "NO" vote would allow the new law to take effect, permitting same-sex couples to marry.

Quote

Summary: This referendum asks whether Maine voters want to reject or accept amendments to the state's marriage laws that were enacted by the Legislature and approved by the Governor in May 2009. The new law would allow same-sex couples to marry in Maine. It also would recognize such marriages lawfully performed in other states. It would allow individuals who are authorized to perform marriages to refuse to perform a marriage for a same-sex couple. Finally, the law does not allow any court or governmental body to compel, prevent or interfere in any way with a religious institution's doctrines, policies, teaching or practices regarding marriage.

After the legislation making the above changes was enacted in May, 2009, petitioners collected a sufficient number of signatures of registered voters to refer it to the people for a vote at a statewide election. The effect of the legislation has been suspended pending the outcome of the election.

A "YES" vote would reject the new law and continue to prohibit same-sex couples from marrying.

A "NO" vote would allow the new law to take effect, permitting same-sex couples to marry.

The law was already passed, what's being voted on is the referendum to reject the law. So voting NO is a vote to reject the referendum, allowing the law and allowing same-sex marriage. I wonder how confused the voters will be based on how convoluted the text of the law and referendum are.

We've been using them for almost a year now as a "basic video" option. A rigger made gloves for the case, dremelling off the screw-hole mount on the bottom, but the gloves zippers have all broken and then you can't use all the included mounts for other things...

I came up with this little macgyver rigging in a few minutes of getting the camera, and I've been using it without an issue ever since:
http://www.facebook.com/album.php?aid=142959&id=545871412&l=40f1f0165d

same sex marriage.


(please excuse my poor slang spelling in the poll title)

might as well poll dz.c and see what percent are still bigoted...

I love the light on her lines in Hollie Sun photo.

How did you spend those 2.5 hrs? trying to call?

It took me about 2 seconds to get this page:
https://eservice.sony.com/webrma/web/index.do?SR=nav:service_support:electronics:repair:esup&ref=http%3A//www.sony.com/index.php
which I've used frequently for sending a camera in for repair, without a problem.

I'm surprised you didn't create a poll. My vote would go for Syncing Feeling.

You're welcome! Thank you for leading the training and saving our lives and our gear!

Here are some photos, including a completion shot:
http://www.facebook.com/album.php?aid=160989&id=545871412&l=47fa030801

Tape is dead. Get a CX100.

I need to take a better photo of just the helmet completed by itself, but here's me in it.

His website: http://home.earthlink.net/~rimworld/id3.html

So this urban legend is validated with video... nice. I'd heard the story, didn't even know it was on video. I know the instructor. I think that was his only jump as a TI. And, I think that was his first probation jump right after the course. And his last jump as a TI...

This is many years old, at least 5+

Quote

it's entirely likely you have the last completed helmet Wes did.
Like all his helmets, it's beautiful.

...(sigh).... Yes, it is beautiful. I feel so lucky I got one, and just devastated to think he won't be around to share this gift with other cameraflyers anymore...

I wrote this in the video forum, but it deserves to go here as well...

This breaks my heart!

I was fortunate enough to travel to Deland in April and have Wes mold my head for one of his amazing helmets. I just received the completed helmet a few weeks ago. It is truly a masterpiece. If you didn't know Wes, you'd never guess from seeing him just how talented an artisan he was. He had a gift. No one in the world made helmets like Wes... And no one ever will... Wow. I don't think he'd jumped in a while, but he loved to tell old skydiving stories. In my brief meeting with him and a plethora of emails, I learned a lot from Wes. He will truly be missed.

This helmet already meant a lot too me. Now, I will cherish it that much more...

Thank you for everything Wes... Blue Skies...

Karen Lewis

Attachment: the best helmet ever made...

His recent masterpiece... my treasure.

Quote

you will probably die. just leave it at that.

I clarified that for him...

But it's true. Depending on what you're jumping. And do NOT do a hop'n'pop with Slider Down out of an airplane! You'll probably break your neck, badly. Maybe a balloon jump...

Start here: http://www.basejumper.com/articles/
and here: http://snakeriverbase.com/

Don't die. Please.

Oh No....

This breaks my heart!

I was fortunate enough to travel to Deland in April and have Wes mold my head for one of his amazing helmets. I just received the completed helmet a few weeks ago. It is truly a masterpiece. If you didn't know Wes, you'd never guess from seeing him just how talented an artisan he was. He had a gift. No one in the world made helmets like Wes... And no one ever will... Wow. I don't think he'd jumped in a while, but he loved to tell old skydiving stories. In my brief meeting with him and a plethora of emails, I learned a lot from Wes. He will truly be missed.

This helmet already meant a lot too me. Now, I will cherish it that much more...

Thank you for everything Wes... Blue Skies...

Karen Lewis

In his honor, let us continue to pursue "The Cause Of His Life":
http://www.newsweek.com/id/207406
and "end the disgrace of America as the only major industrialized nation in the world that doesn't guarantee health care for all of its people."

Wes, is that you? That's gotta be you...

If so, I owe you some photos of my helmet setup, I just keep forgetting to take them when I'm at work. Everyone gawks at my helmet. And I might have another customer for you from Perris willing to fly accross the country.

I'm tinkering with wiring my own focus selector switch. Hope you don't mind me using the idea to make my own. I hadn't told anyone about it because I didn't want to post your idea, then I saw this.

And your bite switch is GREAT. I just need a new heat shrink cover on it already...

My personal preference on switches is a tongue switch, so I don't move my jaw at all. But those have the same issues as all mouth switches.

I also just got a wireless remote switch with a button only suitable for a hand switch. It works great on the ground, but I haven't jumped it yet. I'm not too keen on having anything on or in my hand, even wireless.

So, why not wire up the "Focus Selector Switch" to just take continuous photos in AI Servo mode for the 60 seconds of freefall or so and switch it off at breakoff or after opening? (Assuming you have 8+gig cards and don't mind going back and deleting the useless shots)

Karen