Conquest150 0 #1 March 9, 2004 does anyone know of a way that i could have a rigger modify regular risers to use for a crw canopy. i have just recently bought a fury 200 and it is set up for crw but i dont have any crw risers and am not doing good as far as money is going. any ideas would be appreciated. thanks Quote Share this post Link to post Share on other sites
PhreeZone 15 #2 March 9, 2004 CRW risers are just regular risers beefed up with pop open toggles and larger front dive loops/dive blocks. Just pop any risers on there and jump the FuryYesterday is history And tomorrow is a mystery Parachutemanuals.com Quote Share this post Link to post Share on other sites
Conquest150 0 #3 March 9, 2004 something i forgot to mention was taht this canopy has the assisted dive lines on the A lines. Quote Share this post Link to post Share on other sites
D22369 0 #4 March 11, 2004 QuoteCRW risers are just regular risers beefed up with pop open toggles and larger front dive loops/dive blocks. Just pop any risers on there and jump the Fury Is anyone still using Mechanicals anymore, my Interceptor was equipped with them, do the new zp crw canopy's even need them? RoyThey say I suffer from insanity.... But I actually enjoy it. Quote Share this post Link to post Share on other sites
remko 0 #5 March 12, 2004 Make sure they are short enough. You should be able to reach an outside B-line with ease for trimming and an occasional spiral. Go for a spider, not a mesch slider, much better vision. Gr, Remko -- Everything you know is wrong. But some of it is a useful first approximation. Quote Share this post Link to post Share on other sites
relyon 0 #6 March 12, 2004 QuoteGo for a spider, not a mesch slider, much better vision. ... at least before the neck brace. Bob Quote Share this post Link to post Share on other sites