metallica 0 #1 July 22, 2003 A few of us folks have been invited to demo jump for a national event. The only request from the organisers are to conceal all manufacturer's logos. We have 2 guys jumping Heatwaves and we need to 'cover up' the logos on the bottomskin (white in color) of the canopies. How can we do this? Speed kills! So does everything else... Quote Share this post Link to post Share on other sites
tracieswann 0 #2 July 22, 2003 First, an elliptical nine-cell probably isn't a good choice for a demo canopy; a more docile and larger seven-cell is a better parachute for these events. Use something better suited to the job and then the logo becomes a non-issue. Quote Share this post Link to post Share on other sites
metallica 0 #3 July 22, 2003 Thanks for the tip, but my guys have demo-ed on their HW's before and 'suitability' is not the main issue here. I can have them switch to a more docile Hornet but will still have to settle the logo's issue. Speed kills! So does everything else... Quote Share this post Link to post Share on other sites
darkwing 4 #4 July 22, 2003 I'm not sure where the logos are or how big they are, but you might just sew some fabric over them. Single row of stitches, easy to remove. Use small needle, and thread, just plain cotton/poly thread, not E thread. -- Jeff My Skydiving History Quote Share this post Link to post Share on other sites
kevin922 0 #5 July 22, 2003 QuoteThanks for the tip, but my guys have demo-ed on their HW's before and 'suitability' is not the main issue here. I can have them switch to a more docile Hornet but will still have to settle the logo's issue. I'm not sure about the heatwave, but on my hornet the logo is a seperate piece that is sewn on, you can take it off. -Kevin Quote Share this post Link to post Share on other sites
