trigger1 0 #1 July 1, 2003 Hallo, I need help.One week ago I received brand nev Bonehead Optic helmet. How can I make a holes in this helmet to assembly it with my camera. Sorry for my English, thanks for help and blue skies. Quote Share this post Link to post Share on other sites brenthutch 388 #2 July 1, 2003 I have an optic as well, it's a great helmet. You can just use a drill or a roto-tool such as a dremel. I would recomend the dremel because you can use the attachments to widen holes and to cut out different shaped holes. It is important to keep all of your electronics away from the dust that is created when you do this and to thourougly clean the helmet when you are done drilling, because the carbon fiber dust can reak havoc with circut boards. I would recomend that before you start to drill that you get everything lined up. I used a lot of gaffers tape to hold my dbox where I thougt it shoud be, slaped my pc9 in and had my girfriend look through the still cam and the video to get things lined up. Take your time, the optic is too nice of a helmet to fill with unnecessary holes. Quote Share this post Link to post Share on other sites freakous 0 #3 July 1, 2003 And remember to seal over anyplace where you have exposed any carbon fibres. I.e. the hole that you drilled. I just used a clear coat of nail polish. Quote Share this post Link to post Share on other sites Join the conversation You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Reply to this topic... × Pasted as rich text. Paste as plain text instead Only 75 emoji are allowed. × Your link has been automatically embedded. Display as a link instead × Your previous content has been restored. Clear editor × You cannot paste images directly. Upload or insert images from URL. Insert image from URL × Desktop Tablet Phone Submit Reply 0
brenthutch 388 #2 July 1, 2003 I have an optic as well, it's a great helmet. You can just use a drill or a roto-tool such as a dremel. I would recomend the dremel because you can use the attachments to widen holes and to cut out different shaped holes. It is important to keep all of your electronics away from the dust that is created when you do this and to thourougly clean the helmet when you are done drilling, because the carbon fiber dust can reak havoc with circut boards. I would recomend that before you start to drill that you get everything lined up. I used a lot of gaffers tape to hold my dbox where I thougt it shoud be, slaped my pc9 in and had my girfriend look through the still cam and the video to get things lined up. Take your time, the optic is too nice of a helmet to fill with unnecessary holes. Quote Share this post Link to post Share on other sites
freakous 0 #3 July 1, 2003 And remember to seal over anyplace where you have exposed any carbon fibres. I.e. the hole that you drilled. I just used a clear coat of nail polish. Quote Share this post Link to post Share on other sites
