0
olstad

RSL on a Reflex

Recommended Posts

I thought that a RSL was standard on the Reflex. I have one of the early ones. Look under the left riser cover on top of your shoulder. If the reserve ripcord housing has a gap in it, ends and starts again, then a factory type RSL can easily be installed. Add riser velcro if not there, a lanyard and a riser ring if not there. This is where the ripcord goes through the lanyard ring.

If it's a one piece housing it can probably still be done but would require replacing the one housing with two.

Terry
I'm old for my age.
Terry Urban
D-8631
FAA DPRE

Share this post


Link to post
Share on other sites
All Reflexes ever produced came standard with an RSL. Contact Bomber Mfg for a replacement. If you still have your original risers it'll be a no brainer for your rigger to install. The left riser has an RW 4 ring mounted inboard at the confluence wrap. Javelin risers will also work.

Mick.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0