psw097 0 #1 April 24, 2002 Has anyone flush mounted a Cam-Eye II in an NvertigoX? If so, where did you mount it and how did it go? There is not much padding in the helmet, I am guessing the switch would have to be torn down and epoxied in place. Blue Skies,Webster Quote Share this post Link to post Share on other sites
Krishan 0 #2 April 24, 2002 I mounted my cam eye ll onto my optic. That too does not have any flat places to mount it (other than the places for the cameras). I just super-glued the thing to the side and then gaffer taped all around the sides. It's solid. Quote Share this post Link to post Share on other sites
psw097 0 #3 April 25, 2002 Thnaks, but I was thinking more flush mounted with the Cam-Eye and cables internal and only the button sticking out. Quote Share this post Link to post Share on other sites
tommy 0 #4 May 9, 2002 I mounted my Cam-Eye on my sidewinder like this...with only the button sticking out. (I had to remove the cam-eye from it's plastic housing to do so.) If this photo attach thing works, I'll upload a pic of my setup.-Tommy Quote Share this post Link to post Share on other sites