DcloudZ 0 #1 August 16, 2012 Would anyone mind informing me of the difference between skydiving and BASE jumping rigs? I'm really curious and have a hard time finding information on the topic! Thanks!"Better to have a short life that is full of what you like doing than a long life spent in a miserable way." -Alan Watts Quote Share this post Link to post Share on other sites
NWFlyer 2 #2 August 16, 2012 Skydiving rigs have two parachutes. BASE rigs have one. (That's the basic difference, though there are many more)."There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences." -P.J. O'Rourke Quote Share this post Link to post Share on other sites
DcloudZ 0 #3 August 16, 2012 How is a base rig capable in extracting the parachute in the limited distance that it has to open and with the limited velocity that the jumper has upon opening?"Better to have a short life that is full of what you like doing than a long life spent in a miserable way." -Alan Watts Quote Share this post Link to post Share on other sites
Bluhdow 31 #4 August 16, 2012 Come on buddy...there's a ton of info out there if you're willing to look for it. http://www.basejumper.com/Articles/Gear/Apex BASE #1816 Quote Share this post Link to post Share on other sites
DocPop 1 #5 August 16, 2012 There are several differences, including: - the option to pack slider down - the absence of a d-bag - main canopy design - bigger pilot chutes But there are a lot more things to consider than speed; on-heading openings are very important for certain types of BASE jumps, for example."The ground does not care who you are. It will always be tougher than the human behind the controls." ~ CanuckInUSA Quote Share this post Link to post Share on other sites
Freakazoidile 0 #6 August 16, 2012 Most base rigs are a 2 pin system. One near the top, 1 near the bottom. Containers are generally smaller in size, but mostly stick off your back less. More aerodynamic for tracking/WS and less bulk. Container flaps close in a different order and are designed to open in a different order/sequence. There is no D-bag to hold the chute when packing it. Risers/Canopies are designed to have slight control while opening to keep on heading. More accurate/on heading openings. The wall/object is not your friend and you want to get away from it as far and fast as possible (generally speaking). There is proxy flying, but you still want to deploy well away from the wall and facing away. Canopies can be packed differently, for faster deployment and greater reliability/consistency. There can be slider down or removed for subterminal jumps, generally no greater than ~4 second delays. They open faster and more accurate/on heading Pilot Chutes come in various different sizes (as do skydiving) but people tend to change them up a more depending the on object/height. There is vented/non vented PC's (same with skydiving) but can be more critical because oscillation of the pilot chute can contribute to off-heading openings. No cutaway handles. Also, never heard of an AAD on a base rig. - Not being a BASE jumper, only a curious individual as yourself that is what I know and probably am not the most accurate in information Go to Basejumper.com and just read whatever you canBlue Skies! If you don't like it do it yourself and shut up https://i.chzbgr.com/completestore/12/8/21/RJq7qFNeoECVymQBZu1E3g2.jpg Quote Share this post Link to post Share on other sites
davelepka 4 #7 August 16, 2012 QuoteHow is a base rig capable in extracting the parachute in the limited distance that it has to open and with the limited velocity that the jumper has upon opening? It's more related to the size of the PC, and the design and pack job of the canopy. You have to realize that the skydiving system you jump today is the result of years of development tyring to make mains open slow and reliably deploy at terminal. If you were to design a system for only subterminal jumps, it would be different than you see now. If you wanted a canopy that opens in 100ft and not 500ft, again, it would be different than the equipment you use now. Different jobs require different tools, it's that simple. Seriously, if you have questions about BASE jumping, click on the words 'base jumping', and it will take you where you need to be. Quote Share this post Link to post Share on other sites
waveoff5500 0 #8 August 18, 2012 as dave said the bigger pilot chute is key, but more so as a way to initiate the deployment sequence at a much slower airspeed. on top of the size of the pilot chute, the way the pilot chute is packed is much different than the way a skydiving pc is packed. also the freepacking and freestowing of the canopy and lines and the lack of a slider all contribute to a faster opening. on longer delays a slider made out of mesh material can be used to slow the opening down to a more comfortable level while still being pretty brisk."its just a normal day at the dropzone until its not" 1653 Quote Share this post Link to post Share on other sites