tmcalan 0 #1 September 4, 2011 Just wanted to share some pics of the handy cam glove I recently made from scratch, it seems to be holding up pretty well. I based the design around a sony cx100. the attachment system is similar to a camera helmet and the cover is more to protect the camera its self. let me know what you think....pics attached. Quote Share this post Link to post Share on other sites
Rover 9 #2 September 4, 2011 If your profile is up to date and you intend to jump it let the flame fest begin. 2 wrongs don't make a right - but 3 lefts do. Quote Share this post Link to post Share on other sites
tmcalan 0 #3 September 4, 2011 yes my profile is up to date and no I made it for my brother who is a strong-TI. Im a new rigger and needed a sewing project for the new machine I recently picked up. Quote Share this post Link to post Share on other sites
riggerrob 561 #4 September 4, 2011 Hint: rotate your altimeter 90 degrees, so that you can read it without changing your wrist angle. Quote Share this post Link to post Share on other sites
JohnRich 4 #5 September 4, 2011 QuoteAttachments: CIMG0199a.jpg.zip (235 KB) CIMG0201a.jpg.zip (241 KB) Can't see your photos. Are they jpg images, or zip-compressed images? You must have only one file suffix. Few here are going to take the time to try and view these if they have to monkey around with them trying to figure out what the file type is, and to decompress them first before viewing. Quote Share this post Link to post Share on other sites
tmcalan 0 #6 September 5, 2011 Sorry I didn't properly resize them before..attached are jpeg images Quote Share this post Link to post Share on other sites
Liemberg 0 #7 September 5, 2011 I would want the alti more on the side, not on top of the wrist/arm. Basically - what Riggerrob said. "Whoever in discussion adduces authority uses not intellect but memory." - Leonardo da Vinci A thousand words... Quote Share this post Link to post Share on other sites
