ravel 0 #1 July 20, 2011 is a little hard to fit this canopy inside the D-bag according to the packing chart from PD it should fit fine but it fits tight. Would it be possible to used a Mirage M-4 D-bag on a M3 Container? Quote Share this post Link to post Share on other sites
theonlyski 3 #2 July 20, 2011 Quoteis a little hard to fit this canopy inside the D-bag according to the packing chart from PD it should fit fine but it fits tight. Would it be possible to used a Mirage M-4 D-bag on a M3 Container? It won't fit/look right. It would probably make it slightly easier to bag the canopy, and harder to close the container. Try having some experienced packers/jumpers/riggers show you some techniques for packing. I know that made a HUGE difference in my ability to get my slick canopy in the bag on my Mirage."I may be a dirty pirate hooker...but I'm not about to go stand on the corner." iluvtofly DPH -7, TDS 578, Muff 5153, SCR 14890 I'm an asshole, and I approve this message Quote Share this post Link to post Share on other sites
NYJumper 0 #3 July 20, 2011 Quoteis a little hard to fit this canopy inside the D-bag according to the packing chart from PD it should fit fine but it fits tight. Would it be possible to used a Mirage M-4 D-bag on a M3 Container? the 190 fits in a M3... it is very tight... and you need to loosen the closing loop. there is someone on this site who jumps an 190 in an M3. I was talking to him about it because this is the route i was going to go but ended up jumping the 170.. He even posted videos on youtube for me to see the 190 in the rig. http://www.youtube.com/watch?v=3Er9gmY9bfk http://www.youtube.com/watch?v=ulbqmRKFkJY Quote Share this post Link to post Share on other sites
