Fab 0 #1 December 9, 2010 Hello, Is a velo 103 and an optimum 143 with aad a good combination for an icon i3?. I also would like to be able to put a velo 96 in it... Thanks _______________________________________ Quote Share this post Link to post Share on other sites
liftedtitan 0 #2 December 9, 2010 oh boy...here we go.Moriuntur omnes, sed non omnes vixerunt. Quote Share this post Link to post Share on other sites
Fab 0 #3 December 9, 2010 no..."oh...boy..here we go..just need a yes or no..vector has all the data on their website, aerodyne has not. _______________________________________ Quote Share this post Link to post Share on other sites
DocPop 1 #4 December 9, 2010 According to PD the VE103 packs up slightly smaller than a SA135 or KA135 and the VE96 packs up like a 9-cell 120. I would interpret that along with the Aerodyne site to say that the 96 will fit but you might have trouble with a 103. Hopefully someone who has done it will chime in."The ground does not care who you are. It will always be tougher than the human behind the controls." ~ CanuckInUSA Quote Share this post Link to post Share on other sites
dragon2 0 #5 December 9, 2010 I'm stuffing a vengeance 135 in mine again atm, you're welcome to try a velo 103... I have a smart 120 though. ciel bleu, Saskia Quote Share this post Link to post Share on other sites
verticalflier 0 #6 December 9, 2010 You will not have any problems with either Velocity 103 or 96 in I3 Quote Share this post Link to post Share on other sites
verticalflier 0 #7 December 9, 2010 Quoteno..."oh...boy..here we go..just need a yes or no..vector has all the data on their website, aerodyne has not. UPT builds only harness containers so it is in their interest to post info about all canopies that are out there. Aerodyne builds complete system that means Icon harness, Smart reserve and whole bunch of mains. Since we trying to sell only Aerodyne, we it is in our best interest to post data about our products only. Quote Share this post Link to post Share on other sites
Fab 0 #8 December 10, 2010 Ok..great...thanks all _______________________________________ Quote Share this post Link to post Share on other sites