Milo 0 #1 May 28, 2009 There is a classified ad for a Vector 3 v348 container with an Rmax 188 reserve. The UPT sizing chart does not suggest an Rmax 188 reserve for a v348 container. http://www.unitedparachutetechnologies.com/PDF/Sizing-Chart.pdf Is this a good fit? Or something that would give my rigger fits? Quote Share this post Link to post Share on other sites
klafollette 0 #2 May 28, 2009 I had UPT build me a V3 for my Samurai 170 and PD 176R, and it gave my rigger fits, and didn't fit me. Was hard as a rock, yoke was stiff, and had horrible harness geometry. After conferring with UPT, they admitted that they sized it wrong. They made it a V348 but should have made me V350. They made me a new V350 and everything fit great. So I would think a 188 reserve would be problematic in a V348 unless thats one of those new reduced pack volume reserve fabrics. Don't know the Rmax. But don't take my word for it, call UPT and tell them what reserve AND what main you intend to put in it, and they should be able to tell you if it will work or not. Quote Share this post Link to post Share on other sites
klingeme 0 #3 May 28, 2009 Milo, The R-max 188 is Full fitting in a 350 and will not fit in a 348. If you can find a rigger that will pack it, it will feel like a brick on your back. Let me know if you have any questions. Mark Klingelhoefer [email protected] Quote Share this post Link to post Share on other sites