wildcard451 0 #1 August 17, 2007 Ok, moment of idiocy. I just got a new Z1 visor for my prev empty shell. It has the hinge screws in place, and I can't figure out how to get them off at this point. Laugh all you like, but i figure someone out there can give me the quick answer. Quote Share this post Link to post Share on other sites
pilotdave 0 #2 August 17, 2007 Is it the new one with the big knobs on the outside? Pain in the butt... I like the old one much better. Either way, the only tool you need is a coin. But anyway, stick a quarter in the slot on the inside and push to compress the spring... then turn the knob about 90 degrees and it will pop off. Or hold the knob in place and turn the quarter on the inside... If it's the old design, use the quarter on the outside to turn the screw and use your other hand to compress the spring from inside. Dave Quote Share this post Link to post Share on other sites
wildcard451 0 #3 August 17, 2007 Sweet. Got it. Figured that was it but for once in my life I asked first rather than pulling, breaking it, then getting pissed off. Now if only it would work with my glasses. Quote Share this post Link to post Share on other sites