Jbag 0 #1 November 4, 2009 i tried searching google but i couldnt figure out the correct words to use, so any help would be nice :) using my DVR, the image on the tv is to wide for the tv itself, so like the image is cut off on both sides a little bit, i know this b/c on the science channel, only "scien cha " is visible and on the left its cut off as well b/c the first letter of the name is cut off...any ideas?IHYD Quote Share this post Link to post Share on other sites
ikon 0 #2 November 4, 2009 Assuming that you have an hdtv, put your tv in 16:9 mode Quote Share this post Link to post Share on other sites
Jbag 0 #3 November 4, 2009 i'm trying to find the option, i never changed it...its weird.. *starts looking for user manual*IHYD Quote Share this post Link to post Share on other sites
Jbag 0 #4 November 4, 2009 i made hteo nly tv option that i can but none of that worked :(...it was fine for the longest time, it just started happening recently and i made no adjustment...wondering if the station is sending an image that my box can't adjust to :/...IHYD Quote Share this post Link to post Share on other sites
1969912 0 #5 November 4, 2009 Put the DVDR into 16:9 mode, not the TV. I think "Once we got to the point where twenty/something's needed a place on the corner that changed the oil in their cars we were doomed . . ." -NickDG Quote Share this post Link to post Share on other sites
Jbag 0 #6 November 4, 2009 Quote Put the DVDR into 16:9 mode, not the TV. I think tried, i dont have the option on it :( EDIT: found it....working with this option...IHYD Quote Share this post Link to post Share on other sites
Jbag 0 #7 November 4, 2009 w00t, got it working...for some reason "1080i" was unchecked and that didnt allow me to get the entire signal or something like that, once i selected that on the list of available (my tv is 1080p) it works just fine again, w00t :)IHYD Quote Share this post Link to post Share on other sites
