imstu 0 #1 November 8, 2006 Hello again, I have a PC1000 I am putting into a Sidewinder helmet (with a built-in box) originally built for a PC7. The box is too large for the new camera. Not huge, but not tight enough to hold the camera in place in freefall. I will also have to make an adapter block because the old mount screw was in the forward corner and the new one is more centered. Any advise on how to do this would be greatly appreciated. Thank you. Stuart Quote Share this post Link to post Share on other sites
Miami 0 #2 November 8, 2006 Hard to give good advise without seeing it...my best guess is to just take a dremel and drill out a new hole for the thumbscrew, then line the sides/top with extra foam to help hold the camera steady. Would be best I think to take your helmet to an experienced vidiot at your dz and have them take a look/give tips...from my experience most vidiots are pretty handy at making things like that work.Miami Quote Share this post Link to post Share on other sites
