0
ifics

Cypres 2 question...

Recommended Posts

The count down on the Cypres 2 is different then on the Cypres 1. On the 1st one you just make sure it stops before 6 I think it is (its been awhile since I used that one) I thought I knew what I was looking at but it was recently brought to my attention that I might be reading it wrong. What am I supposed to be looking for when I turn it on (Cypres 2)? Is it supposed to stop at a certain number?

Share this post


Link to post
Share on other sites
hey blake. :) straight from the C2 manual:

"once the switch-on procedure is finished, the unit will run through its self-test. initially, the display will show the number '10' and then a countdown ending in '0'. when the '0' with the arrow down is shown, the unit is functional for the next 14 hours. after 14 hrs have passed, the unit will switch itself off automatically."

lemme know if you have any more questions. :)

blues,
arlo

edited to add:

error displays. if there is an error condition detected during the self-test countdown, C2 displays a number on the display for approx 2 seconds, then it switches itself off (display goes blank).

the error codes are "1111", "2222" or "3333".

Share this post


Link to post
Share on other sites
Quote

The count down on the Cypres 2 is different then on the Cypres 1. On the 1st one you just make sure it stops before 6 I think it is



The original Cypres counts down from 9999 to 0.

Quote

What am I supposed to be looking for when I turn it on (Cypres 2)?



The Cypres 2 will countdown from 10 to 0.

Quote

Is it supposed to stop at a certain number?



No, if it shows a number other than 0 (i.e. 1111) is displayed during the the self-test countdown, there is an error. If after the countdown it displays 0, it has passed the self-test and is ready to use.

Hope this helps,

Share this post


Link to post
Share on other sites
The first stop during the countdown of the CYPRES 1 is the battery strength. If it gets below 5700 it will shut itself off after giving you an error code.

The CYPRES 2 power supply does not require changing like the CYPRES 2, therefore there is no battery strength stop during the countdown.
Arrive Safely

John

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0