npgraphicdesign 2 #1 February 9, 2011 http://www.chutingstar.com/media/catalog/product/cache/1/image/900x/9df78eab33525d08d6e5fb8d27136e95/p/i/piclogo_mind04_1.jpg I have the helmet in the photo above. I am currently in the process of sanding it and taping off sections of it for spraypainting..and I'm having trouble w/ taping off the spot where the chin strap is fed through the helmet. There's a ring of metal there and I don't want to get any paint on it. Nor do I want to remove the chin strap via unstitching it..and then not be able to have anyone (rigger or otherwise) sew it back together. Any suggestions? Quote Share this post Link to post Share on other sites
mjosparky 3 #2 February 9, 2011 http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXC099&P=ML Follow the directions and it works great. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
matthewcline 0 #3 February 9, 2011 Sparky has a good option or you could un-clip the chin strap and use pin striping tape to mask it off and then proceed as normal. MattAn Instructors first concern is student safety. So, start being safe, first!!! Quote Share this post Link to post Share on other sites
npgraphicdesign 2 #4 February 9, 2011 Thanks Sparky and Matt. Those are great suggestions! Quote Share this post Link to post Share on other sites
