Smitty23 0 #1 August 19, 2018 Hello Dug out my original Sky Systems Benny helmet the other day after a few years inside a hold-all. Helmet is obviously sound but the liner, whilst fine, has some spots of a rust-like substance on it. Must be some kind of exotic mould maybe. Anyway, since the liner is just attached by velcro, I would like to wash it. Anybody done this? And if so, what temp, hand wash or machine etc. I just don't want it to shrink or anything. Cheers Quote Share this post Link to post Share on other sites
Bob_Church 7 #2 August 19, 2018 Smitty23Hello Dug out my original Sky Systems Benny helmet the other day after a few years inside a hold-all. Helmet is obviously sound but the liner, whilst fine, has some spots of a rust-like substance on it. Must be some kind of exotic mould maybe. Anyway, since the liner is just attached by velcro, I would like to wash it. Anybody done this? And if so, what temp, hand wash or machine etc. I just don't want it to shrink or anything. Cheers If this doesn't work out for you Paragear sells a replacement set for a lot less that I'd have figured. Quote Share this post Link to post Share on other sites
Smitty23 0 #3 August 23, 2018 If anyone is interested I whipped out the foam liner pieces, filled a sink with warm water and added some of my lad's baby shampoo and then just used a cloth to scrub it all over. Put it in the cupboard overnight to dry and today it's like new again. Wonderful. Quote Share this post Link to post Share on other sites
