JohnGraham 0 #1 April 12, 2005 Hey y'all! Can anyone tell me where I can get my hands on the technical specifications of 3-ring systems made by various manufacturers? I'm particularly interested in RWS mini, standard and tandem 3-rings and Aerodyne and Icon mini 3-rings, but any will be helpful! What I'm after is the set diameters/radii and thickness of the rings themselves and the distances between where they contact each other and the top/bottom of the middle and small rings as they are when the manufacturer makes them (if they are made perfectly to the manufacturer's specs) This is for a final year maths project that I'm working on, and I'd be very grateful if someone could send me the relevant info, show me where to look on the web (I tried the RWS website but I just got an error message about bandwidth ) or where I can look it up. Would I find any of this info in Dan Poyners' Parachute Manual? Cheers! Quote Share this post Link to post Share on other sites
egons 0 #2 April 12, 2005 Contact me in the office in the morning (386)736-7589 I may just be able to help you out Or email me at [email protected] Cheers Egon "Start doing what's necessary, then what's possible, and suddenly you're doing the impossible!" Quote Share this post Link to post Share on other sites
jsconn 0 #3 April 13, 2005 The link below is to our description of the Miniforce from a previous PIA seminar: http://www.aerodyne-int.com/download/miniforce.pdf It probably isn't as technically heavy as you need it to be so send me an email at: [email protected] And I'll forward your questions to our technical departments.Jody Quote Share this post Link to post Share on other sites