JeffBarlow

Experiencing another issue, now with posting new ads. Can't upload a Jpeg image, even print screen here. And error message i'm getting is below. Any thoughts....????

.................................no decode delegate for this image format `JPEG' @ error/constitute.c/ReadImage/575

Removing that special character (') you advised solved the problem - thank you very much and hope it'll solve all the probs. But that type of the special character i used in the file names caused no probs in the past......

And i can't upload the image here as well that gives me ' -200' the above Error message. Happy to send it over electronically to your e-mail address.

Hi there.

Thank you for getting back to me - appreciate it and I'm attaching the screenshot with the Error message I'm getting while attaching the image to the ad. And also an example of the image itself that i can't attach that i had no probs with attaching in the past. Anything else i can be any assistance of - plz don't hesitate to contact me or just post here.

Thank you,

Jeff

Interesting update: 

ok, I'm able now to post ads BUT in terms of uploading pics only allowed to upload pics in certain format (and it's not about the size or type of file (i mean file extension). Classifieds section of this site definitely accepts colour schemes generated by NZA ordering program that were saved in Jpg format. And I'm still have been unsuccessful uploading other files in Jpg form( well, with only one exception). Any thoughts anyone.....????

Thank you Wendy - appreciate your involvement.

As I've said the issue had emerged after the last website update and there is absolutely nothing has been changed in the way the ads were placed in the past: same computer, same type of browser...... etc. My old log in/password gets recognized, i can still sending PMs to other member and place comments here. It does let me starting New Advert as per usual but still receiving the same ' -200' while trying to attach pics to the ads in Classifieds section. I believe Meso or somebody with Admin rights should be able to get it all fixed. 

So, nobody's recently experienced the same issue....???

Since the last update this web page received a couple of weeks a go i can't place an ad in Classifieds section getting

a '-200' sign

at the time of uploading the ad's pics.

Has anybody else experienced the same issue as well?

 

 

The link below might help....???

https://www.dropzone.com/gear/main-canopies/pilot-r353/

Sorry....

3529mm - Base Line A

1 & 10 2 & 9 3 – 8 
62mm 74 80 - Trim A-B
141mm 162 173 - Trim B-C
189mm 224 240 - Trim C-D
100mm ABOVE  D - Full Flight
100mm BELOW  C - Brake Settings

Here we go: 

HORNET 190 
3529mm 1 & 10 2 & 9 3 – 8 
62mm 74 80 
141mm 162 173 
189mm 224 240 
100mm ABOVE  D 
100mm BELOW  C 

Bunch of Europe based companies manufacture skydiving gear without FAA TSO certification. Some of them are even listed on this very website under Gear section.

and maybe quickest....????

Send me a message to:

[email protected]

Mate, based on what you expect from your new canopy Safire 3 is the way to go. Definitely test jump one and i'm sure you won't be disappointed.

Tell me one thing:
if you are on the budget why would you need a non TSOd gear for $1150 + options while you can get for example Vortex container with probably all the options you can think of included (well, except Skyhook) for $1800....????

Their website says….. ‘all canopies meet requirements in accordance with TSO C 23d Standard’ Has the canopy actually received TSO???

Their products might be competitive pricewise indeed when brand new. But you should think about the resale value of it when the time comes too. Won’t be very competitive then for sure.

+ 1

I beg your pardon but it’s a vectorish javelin most definitely, a good combination of both though.

Have seen/had my hands on quite a few of them within last couple of years. And with the price tag attached it’s the best bet on the market for sure. Quality/desingnwise the rig showed significant improvements within last few years. And I think the manufacturer pursuing the right pricing policy to keep the business afloat offering to the market very good quality products at very competitive pricing (not just containers) – I wish you keep it that way guys. Get them tight right and you won’t be disappointed.

Have got experience flying few sizes of Volt - canopy behaves more or less like a mixture btw Safire and Pilot.
One thing i can tell you for sure:
for that much brand new - NOTHING FlIES BETTER

i do believe those two chinese ladies who cut the suit for you probably would be able to manufacture a finest quality pajamas - no doubts about it. You look like wearing one of these on the pic you attached. But the process is actually far more complex, like:
do you they have knowledge about all the aerodynamics involved?(slow suit, fast suit etc... not to mention re: materials to use to meet the performance requirements);
do they know what sausages are for on RW suits, and where to put them on?
what booties are for? and how they work?
lotsa technicalities here bro....

And I wish you good luck with your Chinese copy of the wingsuit, whatever model you gonna copy mate. I guaranteed it won't fly anything like the original.

+1

Very well establish brand and best choice of the container on the current market your money can buy for sure. Plz note there’ve been quite a few changes in the rig’s design over the years (like with every other container’s manufacturer), and the current version of it as solid FF rig as it only could be. The rig holds both EU and US TSO certifications making it jumping legal everywhere in the world. Can’t go wrong with Vortex buddy.
P.S Fully optioned Infinity retails for way over $2K

Have got Optimum 143 in I3, tight fit - looks fine.

Can actually anybody confirm from their practical experience R-Max 128 packs as small as PD106R plz?
And if that's the case what the next size up R-Max 138 would be equivalent to volumewise?