3mpire 0 #1 March 15, 2012 http://www.youtube.com/watch?v=1O9cw4gv-Mg Has anyone mounted an Alti2 Neptune 2 on a BoneHead AltiMount? In the demo video above they recommend measuring and drilling to mount OR using Velcro. I'm curious if anyone out there has done this specifically with a neptune 2? Were the stock screws that you would use to mount to the wrist strap long enough to mount to the BoneHead? I hadn't heard of using Velcro, would that really be a good idea? I have some patches of Velcro with adhesive on the back--I used it to put on the inside of my helmet to make the inserts stay on better. I'm a little hesitant to use that to attach an alti...? Is there a different mount that people with Neptunes use with more success? Thanks in advance all! Quote Share this post Link to post Share on other sites
hokierower 0 #2 March 15, 2012 I have an N3 mounted to an AltiMount. I ended up securing the rubber mount by drilling four holes and using zip ties to secure it. I also drilled an additional two holes for the other sensors. No screws whatsoever. Quote Share this post Link to post Share on other sites
