TonyJ

Members
 View Profile  See their activity

  • Content

    116

  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by TonyJ

  2. I have problems with usb also.. it would read the file through the camera it would lock up.. finally i had to use a pci e card usb ports to see the camera.. my mother board ports somehow cannot do it.. the problem i mainily have is when charging and unplugging the usb cable it locks up and the back red light glows dim.. have to remove the battery.. almost always anything to do with the usb and camera it locks up.. battery does get warm.. i have not contacted the company yet as i just got back home.. also some 64 gig sandisk cards have problems with some operating systems.. found that in my search.. tony

  8. The below list does not represent the only routers or access points that will work with the Roku player. Any router or access point that supports the 802.11b or 802.11g wireless protocol should work with the Roku player... faq page... tony

  9. i really dont know about the apple, but on my wireless cable setup it works great... do you know how fast your dsl is? alot of netflix is in sd, though alot is in hd. setup was easy... i would email the company to make sure it would work on your sytem..tony

  12. I have checked with a system analysis engineer of the National research council of Canada who told me that provided the software is OK, there is virtually no chance for a self testing device (ie. AAD's) to fail when the self testing tells you everything is OK.

    i can tell you the air bags in your car self tests many times a second... the controller can tell if the bag is connected through a resistor in the squib.. now just cause it self tests doesnt mean its going to work when required...the controller has to supply voltage and ground to the squib circuit, then what ever type of expanding gas is used has to work... though it has a better chance then if it fails the test... tony

  18. have you cleaned the throttle body... the min air flow is what keeps the engine running... the space between the blade and bore is for the min air flow... its gets carbon and the air flow is lost.. so the ais does all the work... also have you been using alot of oil... the intake lower gasket can blow out and cause a large vacuum leak... the best way to find this leak is to remove the hose from the air cleaner on the left valve cover and plug it with your finger... pull the pcv out of the right valvecover, with the hose attached... with the engine running and the vent blocked you should feel light pressure on the hole in the valve cover where you removed the pcv... it you feel vacuum the lower gasket is blown.... 99 was the worst year for this.... tony

  20. i was going to demo a pulse, but after thinking about it i really didnt want all white on the bottom skin and ribs.. though i kinda wanted less bulk.. i emiled them if they could make one out of all zp... said it would have to go to R&d.... demo a pilot and bought one... 4 weeks from the time i ordered it was delivered... very happy with it.... not exactly what you were looking for... tony

  23. i agree but it seemed like people were making the seller seem bad, i was just showing a case where he may have not known it....

    im going to sell my spectre, it had a turn when new, went back...i think they did a complete reline, cause when i first jumped it, it was slow to turn, but when it came back it was alot faster.. i have put 500 jumps on it... great canopy... but since this thread i will get a reline, test jump it then sell it....tony

  24. say i buy a canopy and it has a bad turn.. its goes back to the factory and they return it with the turn corrected... they didnt say how they corrected it...now i sell the canopy and the buyer has it relined before he jumps it... now it has a turn... would that be a seller screwing someone? they probally trimmed it out... rather then to rebuild it..

    i had a several year old reserve... had a bad turn, sent back to the factory, got it back... later after i sold it, a rigger refused to pack it cause the one side of the canopy lines were way shorter then the other side... the person i sold the rig to was one of my friends and was aware of the situation.... this was in the mid 90's.... tony

  25. i was going to ask the same question about a J-4.... Im demoing a reg. 168 now... it packs the same as my spectre 190... I tried to demo a zpx, but they only have several of them on the road tour... im thinking you will be alright, but i would like to hear from somebody who has done it... tony