How the Pros Keep Their Canopies In Perfect Form
Canopy wear-and-tear can sneak up on you--and, if you’re new(ish) to the swooping trade, you might not know exactly what parts of your equipment need extra attention. Since a dedicated canopy pilot plies his trade on the basis of impeccable nylon, only a seasoned pro’s advice on the matter will do. To that end, I caught up with multi-disciplinary virtuoso Pete Allum to ask him for his best tips and tricks for keeping that kit in fighting shape.
Pete started skydiving in 1979, and it didn’t take long for him to clamber up on his first podium. Since 1985, Pete has stood on national- and world-level podiums almost every year (sometimes, more than once). In the pursuit of all that gold--and in the course of his extensive coaching work--Pete has made more than 32,000 skydives. It’s safe to say, then, that he’s seen a few canopies through their life cycles. Here’s what he has to say on the subject.
1. Pack your own parachute as much as possible.
When you’re hopping and popping like a broken record, the last thing you probably want to do is wiggle around on a packing mat. Pete suggests that you should suck it up and make the effort, because your personal attention is the most important factor in your gear’s fitness. After all, your packer’s job is to get it in the container. Your gear’s overall well-being is your job.
“If I’m jumping 20 times a day,” Pete explains, “I certainly won’t be packing it every time, but I want to make sure I have my own eyes on it regularly. Even if I have a very heavy schedule, I’ll make sure to pack it myself at least a couple of times a week. That gives me the opportunity I need to see the things I wouldn’t if I only jumped it. When it’s in my hands, I can check for problems like closing pin damage, dinged grommets and center cell discoloration from sweat.”
2. Don’t be shy. Keep your standards high.
Non-ideal openings accelerate wear-and-tear on your gear (as well as your body), so it falls to you to make sure that some standards are being upheld when a third party is compressing your fabric. Pete advocates a professional, proactive position, especially when it comes to stows.
“Packing stows vary widely, and not everyone is aware of how important it is to be consistent,” Pete admonishes. “So it’s a good idea to make sure your packer is using the same large stows throughout and double-wrapping every stow on the bag.”
Finally, make sure the packer is dressing the container’s flaps correctly. If they don’t, Pete notes that creases will form, building memory in the fabric over time. These ever-deepening furrows can cause degradation as the container ages.
3. Watch the wear points on the lines.
With high performance comes high mechanical stress. A small, aggressive canopy has a tendency to shake the system like an energetic rottweiler thrashes a favorite chew toy, so you’ll need to keep an even more vigilant eye on your canopy’s wear points: especially the lower control lines and the places at the top and bottom of your lines where your grommets like to grind. If there’s even a hint of fraying on your lines, bringing your gear to a rigger should rise to the top of the to-do list.
“When I’m in Florida, it’s the easiest thing in the world to bring it over to Performance Designs, so I’ll pop over at the earliest sign of wear,” Pete says. “When I’m farther afield, my standards have to relax a little, but it’s still a top priority to get it done.”
4. Give your pilot chute an extra look.
Pete recommends that you check for wear at the bridle attachment point at every opportunity. Beyond that, he notes that you should occasionally tug out the kill line and check it for fraying, twisting and shortening.
“The system has a couple of inches of margin,” Pete explains, “But if the kill line measures outside that allowance, you need to take it to a rigger.”
5. Keep an eye on how many jumps you’ve already put on the canopy.
Especially if you aren’t a logbook-lovin’ kinda jumper, it’s easy to lose track of a canopy’s jump numbers. According to Pete, that will need to change. When it comes to jump numbers, swoopers don’t enjoy the luxury of unintentional ignorance.
“Especially if you’ve been jumping someplace hot and/or dusty, it pays to know exactly how far along you are,” Pete advises. “As soon as the ticker goes over 200 jumps, I start to pay way more attention, even though the line set is expected to last much longer than that.”
6. Be an active participant in a high-caliber team.
When your zoomy descent becomes the focus of your skydiving days, your need for a professional team of advisers increases exponentially. Take time to build relationships with the very best, most enthusiastically recommended riggers, packers and coaches you can find, and don’t hesitate to reach out to them for guidance. It takes a village to raise a safe (and super) swooper, after all.
To pursue the perfect swoop under the matchless tutelage of Pete Allum, reach out to him through Flight-1.
More articles in this category:
- Todd Shoebotham Talks Pilot Chutes - by Annette O'Neil (Posted: 2017-12-05)
- How the Pros Keep Their Canopies In Perfect Form - by Annette O'Neil (Posted: 2017-11-28)
- Know Your Gear: Harness and Container Systems Part 2 - by Damian Alvarez (Posted: 2017-09-07)
- Know Your Gear: Harness and Container Systems Part 1 - by Damian Alvarez (Posted: 2017-07-03)
- The RSL and Skyhook Debate - by Andrew Goodfellow (Posted: 2017-06-09)
- Preventing Camera Snags - by Annette O'Neil (Posted: 2016-11-15)
- Performing a Great Wingsuit Gear Check (The Easy Way) - by Annette O'Neil (Posted: 2016-11-07)
- How To Avoid Line Burn (Because Raw Canopies Work Better) - by Annette O'Neil (Posted: 2016-09-02)