BH_Composites

Hi! The mount is not listed on our website at the moment because we are currently out-of-stock with no ETA on when we will start the next production run. However, Chuting Star has them in-stock. Details and pictures can be found here: http://www.chutingstar.com/skydive/helmets/helmet-camera-mounts/bonehead-aero-gopro-helmet-swivel-mount Let us know if you have any questions. Thank you! BH Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hi, We carry replacement parts for the Flat Top. Not all odds and ends for helmets like screws, buckles, etc. are listed on our website. But you can always call or email to order replacement parts for helmets. Glad you found what you were looking for at a local shop! Bonehead Composites 5156 Western Way Perris, CA 92571 Office: (951) 943-1166 Fax: (951) 943-3316 [email protected] www.boneheadcomposites.com Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hi, We've installed the Sena SHR10 on the Aero. We have a few customers and a school using it. It fits nicely and works under canopy and in tunnel, but the sound quality is not as during freefall. It works better under slower speeds. Feel free to call our tech support - we may be able to help. Thanks! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hi, We have replacement screws for the Mamba. A full set of all hardware is $10. Give us a call or shoot us an email and we'll get it out to you. Thanks! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

What helmet do you have and when was it purchased? Our chin straps have a tension band over the red pull tab which we added to the full-face helmets two-three years ago (if I recall correctly). Let me know if you need another chin strap too. Thanks! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hi, Give us a call and we'll repair it for you at no charge. We can either send you the parts or you can send us your helmet and we'll replace it for you and check your helmet for any other wear. (951) 943-1166 [email protected] 5156 Western Way Perris, CA 92571 Thanks!! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Our CRW X-Sport has open ears and mesh on the ear opening for better hearing for CRW dogs. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hi, There shouldn't be any cracking when you install the visor. Give us a call if you have any issues. If it does crack when you install it we'll replace it, but we haven't had any crack on installation. Thanks! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

We have a couple of 14 year old tunnel kids flying Mamba's and Aeros. Unfortunately we have discontinued the Mamba. I guess it all depends on their ages and head sizes. FYI - Tried to fit an Aero for a 4 year old and it was a little big. **Results may vary** We say that the XXL Aero goes up to 24", but we just fitted someone with a HUGE 25" head and it fit. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

The helmet will do fine. I don't have any holes planned for the shell currently. We can add a couple to the back of the shell and adjust the liner to add some air flow if need be. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Yes. We have something to check out. Just let us know you're swinging by. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Except this child was born in the USA. Not China! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Yes, it's a webbing tab attached to the buckle. Just pull to release. It's standard. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Attention all flat top pro/Narrow users. Earlier this week a group of experienced camera flyers performed cut away tests on their helmets which DID NOT RELEASE. We have tested the system in house with suspicions causing the issue, but request everyone to perform tests. We have posted an advisory on Boneheads Facebook for you to review and post comments. Please take the time to read all four posts so we can narrow down a solution to the problem. Thanks Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Awesome. I knew something was up! Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

What size is it? There may be a shim layer that can be removed. Why you can't fit glasses is making me question whether you're in the right shell size. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

I'll give you a discount. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Wrong..... The Revolve has a thin lens, the Rev2 has a molded 2mm lens. This is also what makes the tinted option available. Thanks Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites

Hold on to your money for a few more days.. Bonehead Composites (951) 943-1166 www.boneheadcomposites.com www.facebook.com/boneheadcomposites