ultimateswitch

Hello, All this Canon (pro) models use the same plug. And all switch manufactures make it. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Thanks. But this lens don't support filters :( Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Same problem Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

DSE, Do you have some 3D videos published online? Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

I just use the GoPro CineForm Studio, export to side-by-side and edit at iMovie. Still now I don't have a 3D TV to see the results ! Only 3D Anaglyph Glasses :( At next week I'm going to make some 3D basic course with final cut express. Thanks for help. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello again, Yes is the Gopro 3D Setup on a FTP helmet. See the photo. Is a Tandem student with my helmet :) LOLO. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello, I'm start some 3D work with Tandems since 2011 summer. You can find some samples at my Skydive3Dmovies Youtube Channel at http://www.youtube.com/skydive3dmovies. This year, I'm going to invest a lot more to promote this and make 3/4 video works per week. Wish me luck I need it in Portugal skydive market. Is not a perfect 3D work, but the client get the 2D + 3D plus photos on the same pack. More at www.facebook.com/skydive3Dmovies Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello, No I never try it Conceptus bite/tounge switch. Only on the Skydive Ultimate Switch, for some special request setup. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello, Yes, mayby is slow memorycard problem. But is you have any questions you now here find us. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello, This is my new Bonehead Composite FTP helmet. Helmet Manufacture: Bonehead Composite Model: Flat Top Pro, size M. Setup preparation: Reinier Bos - www.ramairskysport.com Team: Atmosfera G4 Portugal 4way System details: - ZkullsTM attachment system, complete kit for integration; - Zkulls CAGE bracket for HD Sony CX116E; - Zkulls Stills Switch Bracket for panoramic and vertical image setting - Zkulls BASIC stills plate for Canon DSLR camera; - HYPEYE D PRO Camcorder, indication and control system; - Ultimate Switch, the most performance switch for skydive photography "inside" :) - Schumacher holder and Brent Cross Sight Next step for this setup: - Dual camera for 3D skydive video, for the front plate; - Pro 126 LED Continuous Light; - Others... Thanks to Reinier from Ram Air Sport, and Linda from Bonehead. Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

My brand new REvolve full face helmet has just been tested under the most cold conditions I’ve ever jumped below 14k! I would like to thank BH for providing me with one of the best skydiving helmets I’ve owned, since hat shop to factory diver, oxygen to Z1 and Mamba. God, it was cold! But REvolve just has some good new ideas that make it probably the best amongst the others. Beginning with some extraordinary good padded inside cushions, that not only keep your ears warm and protected, but also provide excellent noise reduction during the way up. Oh! Did I mentioned that we don’t have to take the helmet off? Yes, that’s right, the full face helmet becomes totally clear face when the chin protection and visor comes all the way up! And that’s a major advantage when you need to agree on something inside the plane, especially with a RW team or even a student to brief. More advantages that might not be noticed unless you skydive often with a RW team trying to reach higher on points (going crazy sometimes) is the fact that the chin protection is one of the best and strongest I’ve tried. Yes, I’m the one that managed to destroy two flip up lens on the Z1 (nearly got myself blind on one with the broken slices of shredded glass/plastic!), on a hasty approach to tail’s boot(ies) in block 2 (I’m point, going around as close and fast as I can…) and also the Mamba’s visor got open twice on head to head bumps with OC. Apart from all those improvements, REvolve looks tough and aggressive, the way I like a helmet to be, comfortable and easy to operate, has both sides pockets to hold your audible devices, a discrete chin strap with all the extras you need to personalize your head adjustments, an easy removable lock to release the visor which also locks automatically when lowering it (and that’s also a big advantage as you don’t have to worry much when getting ready to exit and just want to lower it on the last second…) and the most effective lens I’ve ever seen on skydiving helmets. Narrow, as in strong, easy to replace, only two attachment screws, huge field of view (that matters on RW, especially if you’re point and have to fly backwards all the time…) and did I mentioned comfort? Yes, I guess so. No longer I have to go spitting or blowing my nose inside the helmet (yes, that’s disgusting, isn’t it?) after deploying the canopy. What about for landing and walking to the packing area? No longer having to carry the helmet on one hand, or just balancing it on the top of my head (risking letting him crash on the ground) or just for wasting time when on a back to back jump. For all of that and for supporting our REvolving Atmosfera Portugal G4 Team THANK YOU VERY MUCH BONE HEAD! Blue skies from the westernest country in Europe! This review was made by João Henriques, my 4way team mate. Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

My brand new REvolve full face helmet has just been tested under the most cold conditions I’ve ever jumped below 14k! I would like to thank BH for providing me with one of the best skydiving helmets I’ve owned, since hat shop to factory diver, oxygen to Z1 and Mamba. God, it was cold! But REvolve just has some good new ideas that make it probably the best amongst the others. Beginning with some extraordinary good padded inside cushions, that not only keep your ears warm and protected, but also provide excellent noise reduction during the way up. Oh! Did I mentioned that we don’t have to take the helmet off? Yes, that’s right, the full face helmet becomes totally clear face when the chin protection and visor comes all the way up! And that’s a major advantage when you need to agree on something inside the plane, especially with a RW team or even a student to brief. More advantages that might not be noticed unless you skydive often with a RW team trying to reach higher on points (going crazy sometimes) is the fact that the chin protection is one of the best and strongest I’ve tried. Yes, I’m the one that managed to destroy two flip up lens on the Z1 (nearly got myself blind on one with the broken slices of shredded glass/plastic!), on a hasty approach to tail’s boot(ies) in block 2 (I’m point, going around as close and fast as I can…) and also the Mamba’s visor got open twice on head to head bumps with OC. Apart from all those improvements, REvolve looks tough and aggressive, the way I like a helmet to be, comfortable and easy to operate, has both sides pockets to hold your audible devices, a discrete chin strap with all the extras you need to personalize your head adjustments, an easy removable lock to release the visor which also locks automatically when lowering it (and that’s also a big advantage as you don’t have to worry much when getting ready to exit and just want to lower it on the last second…) and the most effective lens I’ve ever seen on skydiving helmets. Narrow, as in strong, easy to replace, only two attachment screws, huge field of view (that matters on RW, especially if you’re point and have to fly backwards all the time…) and did I mentioned comfort? Yes, I guess so. No longer I have to go spitting or blowing my nose inside the helmet (yes, that’s disgusting, isn’t it?) after deploying the canopy. What about for landing and walking to the packing area? No longer having to carry the helmet on one hand, or just balancing it on the top of my head (risking letting him crash on the ground) or just for wasting time when on a back to back jump. For all of that and for supporting our REvolving Atmosfera Portugal G4 Team THANK YOU VERY MUCH BONE HEAD! Blue skies from the westernest country in Europe! This review was made by João Henriques, my 4way team mate.

Hello Charlote, If you need any help, don't hesitate, contact me at: [email protected] or Facebook: facebook.com/ultimateswitch I have on my hands two new Ricoh setup, finished at 5 minutes ago. Regards, Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello, If you are worried about the weight, take a look at the Ricoh Digital photo camera models. You can find some post about this subject on the forum. For example: Ricoh GXR/GX200 Camera body, Approx 200 g vs Canon 550D Approx. 530g, without lens. See more in this link, http://www.dropzone.com/cgi-bin/forum/gforum.cgi?post=3831849;sb=post_latest_reply;so=ASC;forum_view=forum_view_collapsed;;page=unread#unread Ricoh website. http://www.ricoh.com/r_dc/professional.html Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315

Hello all, As promised, I already finish and shipped the first Skydive Ultimate Switch (blow switch) adapted to a Ricoh camera model (new and very light cameras) If some one want to make it, is very easy. With this setup you can use your bite, tongue or blow switch (all models). 1– Buy the remote control (Ebay) or use the original one (my option is buy a new one from China manufacture) 2 – Open the remote and remove the AAA power battery; 3 – Search the electronic “touch switch/button” 4 – Soldering a 3 wired cable (My example: yellow + white and red on other terminal) 5 – Make the proper connections for your switch model… 6 - Test 7 - Close the LR remote and put the AAA battery oon the right place. This is a micro switch, be careful with the soldering work. If some one need help just contact me to [email protected] Nuno Lobo Paulo Skydive Ultimate Switch . www.ultimate-switch.com Email: [email protected] Phone: 00351 919 327 315