skymik

Hi I'm looking for the Dash-M reserve canopy manual and its TSO certification you can help me? Thank you

This SB talks about the Tandem Atom reserve ripcord http://www.sitoflash.it/skymik/areafiles/CS188.pdf http://www.skymik.it

Just curious, the large ring is on the right side of the flap, correct? There are a few V2's floating around that were modified under an FAA approval for a more 'normal' type RSL with the ring on the left side of the flap. ETA: This is the set up, and yes, it is misrouted. This repack of the 'RSL is dangerous, incorrect, the ring of 'RSL must be placed between the fixed ring on the flap and the housing http://www.skymik.it

Hi, if you would like to replace the RSL removed, this is the system (see attached file) http://www.skymik.it

http://www2.sitoflash.it/skymik/areafiles/PSB20110523.pdf http://www.skymik.it

Il sartiame Innovation Company ha rimosso l'approvazione per l'uso dell'AAD Argus http://www.rigginginnovations.com/support/sb/SB-1548.pdf http://www.skymik.it

hi I wanted to know what you think about the Magnetic Slider Retention Device like Sky Tie and if is in according whith the harness constructor. thanks http://www.skymik.it

Mandatory replacement of cutter products until August 2007 http://www.skymik.it

I suggest you read the final part of its manual, although there are boxes to write to the warning label that also has the obligation of reserve canopy check permeability in following cases: after 40 repack, 25 jump or dive into the water. And also you can not replace Maillon Rapide with soft links, Parachutes de France does not approve SkymiK http://www.skymik.it

I spoke with the company!!! I wanted to thank everyone for availability. Especially Rover and Jerry Baumcher Thank you very much!!! Michele http://www.skymik.it

Thanks for your interest Jerry but I tried to send him an email but does not work, email returned to me I'm not lucky for that matter Michele http://www.skymik.it

Give me a couple of days and I will send you a ***copy of the original RSL drawing with all the specs to build them yourself. Take the offer of a free one for now. Mick. sorry mick but I tried to send you an email, but there is a problem because the mail comes me back my request is still alive thanks michele http://www.skymik.it

Give me a couple of days and I will send you a ***copy of the original RSL drawing with all the specs to build them yourself. Take the offer of a free one for now. ___________________________________ Mick thanks for your willingness Michele http://www.skymik.it

the harness in question has already designed for the RSL, what is missing is the webbing connecting risers and reserve ripcord cable (RSL) what I need is the original design of this, if the company was still alive ask him this http://www.skymik.it

is a start .... better than nothing! thank you very much!!!!