FrEaK_aCcIdEnT

PD Optimum Reserve 143 loaded @ 1:1.05 ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

... can we add to that; to facilitate a "symmetrical" opening? ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

from what I know... (Which isn't much and should always be taken with a grain of salt until someone with more of a background in the matter chooses to respond to you inquiry.) 1) ask the manufacture for it. 2)extra fabric (I think...) 3)effectively doubles the price John Deere where are you??? Edit to add: [url "http://www.dropzone.com/cgi-bin/forum/gforum.cgi?do%3Dmessage%3Buser%3D69436=Send+Private+Message"]Click Here[/URL]

has anyone considered a teflon coating? See picture. of course spray a paper towel and wipe it on then let it dry. I would think it would work on both cu aways and reserve cable??? ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

i remember someone having trouble posting a video and wanting some help. people on a travel trailer at a dropzone with a jet flying over VERY low. I posted it and I think it was 2 days later when I un-posted because the pilot was worried about getting into trouble. It wasn't at night though. Maybe late evening so probably 2 different events?? ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

I'm not a rigger so this is my clause to anything I write below... that is scary! So, accidental routing through the closing loop when installing the seal. Maybe something could be done to mistake proof it. • smaller lead seals that will pass through the grommet? • a personal check for riggers to include on there final inspection? • I know I will certainly keep it in mind when receiving my rig back after a repack. It made me go check it just now... edit: you would think that the spring in the pilot chute would have snapped it. Maybe the combined friction of the closing flaps are locking it down enough so that it's stored energy isn't able to overcome the 4.5lb. tensile strength. Sorry if this post has no value. Just a bored wannabe wanting to understand. ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

That would be much more appropriate!

Well this post was worth the wait... I GOT IT! My Optima II came in the mail today! Gary, Thank you for your customer service. I know it took a while but I had faith in you. I appreciate your willingness to paypal funds to purchase from a vendor here in the US. I went with Chutingstar. Mike, if you read this, thanks for your great service as well! I am quickly learning how to operate it and can't wait to make a special place in my helmet to hold it! I am incredibly surprised with my stroke of luck in this competition!

The whole shebang is that there are two sides to the story, no? correction... 3 sides-rememebr? Side A, Side B, and the "COMPLETE" truth. ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

wow... Looks like this one could get messier than it already is. Dirty laundry indeed ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

"Oh no that's ok, i just want to exchange it for a new one." [evil thought] I will return it next week after the next boogie at another store.[/evil thought] ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

I will add $.02 to that! (TAKE THE ADVISE ABOVE) There, now it's worth $.04 ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

There's something wrong with me. Admitting you have a problem is the first step of recovery! I never admit my problems for that reason. Who wants to recover from this? ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

Hey V-B, You never know what one individual is dealing with in life. For all we know the OP could be dealing with a lot of personal stress and venting it on the one thing that has been eating at him the longest. Then again it may just be his normal selfish self. I'm not going to judge or assume. Haven't you ever said something and regretted it later. We all have. For all we know, he could be kicking himself in the pants right now. PmedicJ went about finding resolution from Gary. True, he did it in a untactful manner. Gary responded in his reply to what PmedicJ said. Both are in agreement that they don't want to do business with each other in the future. That aside; Gary's reputation is still in tact for providing good customer service and dealing with issues. He explained what happened and why he couldn't email PmedicJ. Future customers that actually do a dropzone search will probably read the full story before getting to the end and realize that Gary isn't out to screw anyone over. He is over worked, under staffed, and "trying". Dealing with Gary in the past, I still plan on dealing with Gary in the future. ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!

Gary offered to send me the amount it would cost to buy an Optima II from any dealer in the US due to him not being able to get anything shipped with batteries. He also said that he would put enough in there for your refund if I was willing to make sure it got back to you. The amount he sent even covered for shipping. That was pretty good customer service in itself. I know it took a while to receive your refund, but in the end everyone is happy. That is all that matters. Hopefully next Friday I will be jumping with a new toy! That sure makes me happy! ExPeCt ThE uNeXpEcTeD! DoNt MiNd ThE tYpOs, Im LaZy On CoRrEcTiOnS!