dpreguy

Members
  • Content

    901
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by dpreguy

  1. As a former Dist Atty. I am sure the law in northern Calif is the same as everywhere: (appx) Any person who knowiingly purchases stolen goods, or purchases goods that he should have a reasonable belief are stolen, is guilty of theft. So, don't buy a $2000 rig for $250, as you would be in the second category. You would be "complicit" as they say. You'd be in deep yogurt - fast. Turn this guy over to the nearest police detective to investigate. Meanwhile, hope the true owner sees this post and is able to ID his stolen gear. Only an undercover cop can make a decoy buy. You can't
  2. Choosing Daedalus is wise. He was the father of that young rebel, balls to the wall Icarus, who we all know wouldn't take his father's advice. (Of course, you could appreciate the cool factor, of being the most kick-ass feather wing flyer of all - until the wax melted. )
  3. Very good points: . Never deploy anything over rhe crowd . Low altitude is not the best time to start dealing with problems Correct on both points Mine works for me, as it is a nicely deploying setup. May not work for everyone.
  4. John Rich My suggestion: 1. Time your descent from the altitude that will give you the correct number of seconds. This is easy, as you now have the appx number of seconds = about a minute and a half or bit more for the Nat'l Anthem and about 73 seconbds for America the Beautiful. Now make a jump or two with your canopy to tweak or confirm the seconds it takes for you to touch down. Carry a stopwatch to do this. Then add about 10 seconds. It is better to have the singer end prior to your touchdown, than after. 2. Tell the announcer or the singer to start singing immediatley when the flag is unfurled, and not before. 3. On demo day, deploy your flag at the at the correct altitude. I have sometimes written the altitude on a piece of masking tape and stuck it to the left side of the altimeter. It has been my experince that waiting until (for me it is about 1400 feet AGL) that altitude to deploy, is the best drama producer for the performance, as the crowd actually sees the flag unfurl and then the singer begins. Quite dramatic. Better than having the flag unfurl at high altituce where no one can see the deployment, while the crowd patiently waits for the singer to start. No drama with that method. No gadgets, no radios. Just deploy the flag at the correct altitude and have the singer use the flag deployment as the que to start singing. Add 10 seconds to the 'song duration time' if you are confident of the time to sing, or 15 seconds if the singer isn't consistent. Works every time.
  5. Years ago (apparantly before a "number strip" was invented)I made a logbook cover out of Para Pak and sewed the SCR and SCS patches on that cover. For many years, I enjoyed seeing the patches when I logged. As time marched on, and the sport progressed, and since most skydivers who started jumping after the 80's had never even heard of SCS or SCR, up to yr 2000, when I still logged I had to explain what the patches were when a younger skydiver would see it. Now I'll bet not one of a 100 skydivers at the dropzones now have ever heard of these awards; or if they had 'kinda heard' of them, what they are, or what SCS or SCR translates to. It is kinda a 70's and possibly 80's thing that has endured, and is still cool, but just not that mainstream now. I'd opt to put them on a logbook cover, because your non skydiving friends who would see that stuff in your living room in a shadow box wouldn't really care. It's a skydiver thing.
  6. aeroflyer I am only referring to the "wrinkle bridle" where the kill line that is inside the part of the bridle that is in the bag. Uh... maybe about 10 inches of it. When you cock the PC, this lower part of the bridle, you produce wrinkles. These wrinkles are put in by compressing the lower part of the bridle by pulling the kill line on the inside of it. Once compressed, it wants to pull out again, especailly when the "wrinkle bridle" is new. The original poster was thinking of going to this type. (Not the type shown in the pictures.) I was trying to warn him of the necessity of keeping the wrinkles from 'unwrinkling' for want of a better term. If any part of it unwrinkles, it starts to collapse the PC, as it was designed to do. The problem is that it does this when you are packing, and it is difficult to confirm it hasn't. I much prefer the kind in the pictures, as once it is cocked, there is no inherent force wroking against the packer to uncock it. With the wrinkle bridle, a little jostling or even just sitting there watching it w/o touching it, the wrinkles trry to unwrinkle. The guy I switched out was having gear fear from worrrying about having another mostly uncocked pilot chute fail to inflate fully, resulting another PC in tow=another reserve deployment. (I don't remember if a Wings supplies that type of bridle). Of course tying a knot just above the bag, or figuring out some way to pinch it and hold it would work, but when the jumper is in a hurry, or gives it to a packer...ithose compressed wrinkles push out and sneaks to a half cocked configuration without the packer knowing it. Hope this helps
  7. If you are going into a statium that has a zip line camera, just play along with this explanation, even though it is a bit long: Grab a piece of plain typing paper and lay it on the desk. Visualise 4 towers. uh... about 7 inches high, just outside the 4 corners of the paper. These towers represent the 120 foot "anchors/pullys" for the camera cable support system, (in a typical football stadium) Now visualize 4 individual cables "anchored" at the tops of the 4 towers, and connected to the camera (now in the center of the field). If the cables are somewht taut, the camera is suspended pretty high, and the TV viewer gets long overhead view over the center of the field. Slacken the cables evenly, and the camera stays in the center of the field, at whatever height the operator wants. The operator can even slacken the cable so much that the camera lays on the field. If the football player is to be viewed colsely, then just slacken the cables, and the camera lowers. Slacken the cables evenly and the camera always stays in the center. Slacken and tighten them in an even but coordinated manner, and you can put the camera over nearly any part of the field at any height. The limitaion is that the closest they can get to any corner, is about to the 20 or 30 yard line and maybe about 50 feet in from the sideline. To view a player in , let's say the 30 yard line, and off to one side, just reel in the one corner cable in that corner, and slacken the other three, and the camera is suspended nearly over the player if he isn't too near to the the sideline. These cables are very thin, and are absolutly invisible to the jumper coming in from above. Now. To get to the point. When the jumpers exit the plane, the camera is still wholly suspended and running around, suspended 40-50 -60 feet in the air, taking shots of coaches, performers, diginitaries, cheerleaders, etc, most of whom are probably in the center of the field awaiting your arrival. About 45 seconds before touchdown, or a whole minute if you are lucky, the operator quickly lowers the camera to the ground in one of the corners, at about the 20 or 30 yard line and 100 feet in from the sideline, a crew member detaches the long cable ( the one from the 120 foot tower opposite the corner) from the camera and lets it go, or runs like a madman to the corner where the tower is. The camera end of that cable will obviously lay on the groud when the tension is off. Gravity pulls it down and back, as the tension is released. Here is the situation for the demo jumper: 3 cables are still attatched from the three 120 foot towers to the camera, which is now on the ground at the 20-30 yard line, being hugged by a crew member, and 100 feet in from the sideline, and within reason are slackened from the three remaining towers. They loop down in predictable downward arcs kinda like you see on a suspension bridge, as does the freed long cable. The fourth (long one -disconnected) cable lays down better then the other three. You, as a demo jumper must still visualize the differing loop arcs of the three cables still connected to the camera, as well as the disconnected long cable. These hanging looping cables are a hazard; especially the three still connected to the camera, as those three are not laying on the ground like the long one. These three are looping for their whole length from the towers to the camera hugger. Remember, they are still suspended, in the air from the towers, and pose a great hazard below 120 feet. The closer you are to the 4 towers, the higher the cables, and even though they are slackened, the only really hazard-free part of the field/airspace 120 feet and below, is the part of the field not under the 4 cables. You had better know, before exiting the airplane, which corner of the field the camera will be when it is lowered to the ground, as you must gauge your final approach WITHIN the trapezoid of the field that remains safe when you are below 120 feet. Remember, the 4 cables, even though slack, still hang down from the towers in a "suspension bridge"manner, so the closer you are to one of the towers, the more likely you will run into one. You must trust the zip line camera crew to actually get the camera on the ground at least 45 seconds before you touch down, detatch the long cable and the operator must allow the slacks quickly. If you run into a cable, you will probably die, if you fall unimpeded from an altitude greater than 50 or 60 feet. With a fall from 60 feet, everone dies. When everyting goes right, and you avoid the part of the airspace/field below 120 feet under the cables looping down from the towers, you are just fine. When you leave the plane, you are committed, even though the zip line camera is probably still suspended over rhe center of the field, or wherever, and at what ever height the opreator wants. The cable crew must do it's job correctly, in a timely manner, and lower the camera in the corner you expect it to be, and quickly allow the slack to occur. As in all thngs, when everything goes right, nobody gets hurt. If you do one of these jumps, you will have more on your mind than just swooping.
  8. "..made his first skydive from 14 feet" (OK just a bit of humor here)
  9. If you go to the one that is "completely enclosed' you must be very very vigilant. As you cock the pilot chute, it wrinkles the part of the bridle inside the bag. So far so good. Good in theory. But...those wrinkles have an obvious tendency to straighten, which reverses the cocking you just put into it...leaving you to be (a bit o' humor here) half cocked. You must be sooo...vigiliant to prevent this. I know of a cutaway because of this. Pilot chute was not sufficiently inflated, as the kill line was half extracted. I watched him pack the next pack job and he could not keep it cocked, as the bridle was new, and stiff. Those wrinkles would not stay wrinkled. In fact, they were more like a spring. He switched.
  10. Just keep an eye on the continuing hemorrage of our dues money. The first $10,000 was only the beginning.
  11. I re -read the blog in the USPA Update. I noted: "...we'll "run"(read: pay for) a training camp to practice all the elements...flag jumps, pyro..." On what money will the camp be run? Guess: It will be more of your membership dues. Who will buy these flags and flag setups? Guess: More of your membership dues. Who will pay the per diem expenses for these "champions" who will attend these camps? Guess: More of your membership dues. Who will pay for these practice jumps? Guess: More of yourmembership dues. Pay for pyro to practice with? Guess: more of your dues money. You watch. Next expense will be someone to run this team, let's call that person a full salaried Demo Director. Who pays? More of your dues money. The expenses are just beginning. Motel rooms, rental cars. It goes on and on. If you are a present pro team owner or member, can you give me an estimate of the total of these anticipated costs of this camp and the expenses to equip, train and provide travel for this "Championship " team? I'm guessing the $10,000 already advanced will not even begin to cover the costs of the ICAS booth and the persons to get there and meals AND this "steep learning curve"camp, the flags, pyro, etc.., much less get a team funded and going. OK you team owners. Please start estimating. I hope the accounting for this program is segregated, and all of the expenses of this idea are tallied separately, and not buried in some general USPA line-item, where no one can determine the true start up costs for this camp, for equipping the team, the time expended by USPS employees, the "promotional materials" the booth at the airshow itself, well, the list goes on. When corporations want to hide true expenses of a project, they hide the majority of expenses in the general compnay expense report under items such as: as "Travel","Meals" "Supplies" "Equipment" yadda yadda. Will this happen here? Hope not. So, you experienced team owners and members, please tally up these anticipated expenses for all to see. Go ahead and low ball it. Then we will be previewing the hemorrage of our dues money over the next few months. Before even one show is booked or paid. Oh. Don't forget to add in the ICAS booth and the hotel and travel and meal expenses of the USPA dudes that will be attending ICAS. This adventure is going to cost a lot, and airshow sponsors don't pay very much. In my opinion, finacially it is guaranteed to fail. ( Oh yeah- I forgot. This USPA Chanpion Team is going to get a big sponsor in the distant future and make it all right for us members. Sure it will.) Finacially it will not work, except as an annual continuously subsidized entity. As a member. I do not approve of paying subsidies for this year and for every year for this idea to play itself out. If it doesn't pan out, are the creators willing to fall on their own swords?
  12. Nice post Airtwardo. Your posts, plus the constructive posts by others have vetted the issues and objections, and puts a magnifying glass on the issues. It is now time to ask the USPA directors and hopefully with the urging of the Board of Directors, to withdraw this idea. If the ICAS dues have been paid, than ask for a refund. Please abandon this whole idea. Now. The stated objective: (Get money for our 60 US Team members.) by creating a USPA demo team, which they believe will enthrall audiences, which will then lead to positioning this team as a "brand recognized entity", to then, (They hope) entice corporate sponsorhip; is a dreamer's busines plan. It is a plan that I judge to be based simply on optimism. One thing has to happen, which will trigger the next thing that has to happen and so on. It is too vague. It is based entirely upon speculation and hope. You could not go to your bank officer and get a loan based upon this business plan. This 'means to the end plan' justification of raising money for our competitors is wrong. Using $10,000 of membership money to buy a booth at ICAS, and the spectre and certainty of allocating even more money soon, to put on a "camp", probably pay the expenses of persons to attend this camp, and the necessity of future draws necesaary to pay for jumpsuits, parachutes, flags and travel money etc . is too much of a burden to pay to embark on a "....lets see where this thng goes..." plan. Please recognize this idea as a house of cards, based upon pure speculation, and having only hope as it's underpinning. It was a bad idea and should be instantly abandoned. Please go back to the wellspring of the collective intelligence and creativity of the membership and ask for ideas, and then use these new ideas to solve the funding problem for our competitors. If it takes a dues increae, then put this idea out to the membership and let it be discussed. Then have the Baord of Dirctors vote. That is only one idea, but there may be others. Discuss whatever ideas are out there, put them in an article in the Parachutist, let the membership at large comment on them, and then let the Board vote. That's how it's supposed to work. I am a strong USPA supporter and believe our organization has saved skydiving more than once from the governmental agencies who would have fee'd us and regulatd us to death. Our executive board directors have done outstanding jobs in their respective duties, however I believe they shoulld confine their energies to their job descriptions and resist the temptation to dabble into the unkown. I am afraid this dispute will tear USPA apart internally. Let's hear the ideas of how to find the funding for our teams and get to work on those ideas. Doing so would be constructive, and produce cohesion, not dissention, in our organization.
  13. Mr Bilvon. I apologize for my abrupt answer. I guess I was fired up in all of this. We are both entitled to our opinions.
  14. Commenting on the response, with "ED" at the end. I assume it is Ed Scott's official satement. Let's go over what he says it is not: . not a USPA team . not a US Demo team . not about sport . not about USPA promotion What he says it is: "It is an effort to the help US Team publicize itself and to leverage that publicity toward spopnsorship of the US Team" So, the US TEAM is a separate entity? Not a part of USPA? A separate entity that is seeking an endorsement from Coca Cola or Budweiser or another corporate entity? Sample Title: The US Team sponsored by Coca Cola. Well that's the Coca Cola team, and that's how it will be known. It won't known as the US Team. If it was otherwise, why would Coca Cola fund it. So that is the ultimate goal here? This sponsorship thing? That's it? And the end justifies the means? That is what Ed Scott's editorial and his response says. 'Trample on the existing teams to get where we want to go." Steal thier sponsors, and don't think another thing about it, because our goal of getting a sponsor is so worthy, it justifies stabbing existing teams in the back.' The means to get that sponsorship is clearly stated in the editorial: 'Go to ICAS and outbid the existing teams, (as surely they will, as they don't have to factor in the same expenses a civilian team does.) and go after that sponsorship goal, despite the damage done to the existing teams' That is a clear conflict of interest, as it all done with membership dues money. The civilian teams are paying those dues too. That's a bitter pill to swallow, and a bald-faced betrayal. Lat's also digest the next statement of Ed Scott's response, "Several well known demo jumpers have pledged their support...yadda yadda" Read between the lines and what you have here, is a proposal to field a professional team, financed by USPA dues. Few, if any so-called US TEAM members will be on this team. Maybe a couple of token members. In fact, I'd like to see a list of US TEAM members who even have PRO ratings or have done a significant number of high pressure demos. Last time I checked, the US team consists of 4 and 8 way jumpers, accuracy jumpers, swoopers, etc.. Not demo jumpers. It is obvious to me that this will NOT be a demo team comprised of present US Team members. I predict it will be a demo team hired by the US TEAM, attracting existing demo jumpers. This would be like abandoning the necessity of a college football team to be comprised of students at the college. It would just be a team paid for by the college, without the necessity of having college students on the actual team. They would be recruited and paid for, like any professional team. The so-called US DemoTeam, (Oh excuse me, the US Team) without any actual US Team members on it, (or very few anyway), would be handsomely paid, and dedicated to bidding on gigs at ICAS, and stealing thse gigs from the present civilian teams as a means of accomplishing its goal of sponsorship. Besides the betryal of the dues paying members, the cute little "loan" to the US Team to have a camp and pay for ICAS, exceeding the powers of the organization, etc., I see a bunch of decsion makers operating on the assumption that championship team members will automatically be competent demo jumpers. That demo jumping is so easy that all you need is experience in 4 way or 8 way or accuracy or style or some other discipline. That demo jumping isn't a unique discipline at all; it is just a jump you do in front of a crowd, and that anybody can do it , and do it well. If that is true, why the camp? Will there be persons on this US Team that will be performing their first demo in 2012? Well, if the intent is to have present US TEAM members do the demos, that is exactly what will happen. No go back and re-read the previous paragraph, and you will see the actual scheme as it will be played out. Only token US Team members, and mostly just hired professionals. It would be dishonest to sell demos to a sponsor by calling it the US Team, but what the heck, we'll just let that slide, because that is just another means to the end. It would be a laughable statement to say a really good demo jumper would automatically excel at going onto a 4 way team. Just send the demo jumper to a little camp, and he'd be great at 4 way. A ridiculous assumption indeed! But the same persons who would scoff at this assumption, do not hesitate to believe that a good 4 way jumper will automatically a good demo jumper after a little camp. I find that assumption to equally ridiculous. But that is apparantly the underpinning for this whole idea of Mr. Hayhurst. He is wrong.
  15. I ahve written an email letter to Exec Director Ed Scott, and James Hayhurst explaining, in short, that this is a bad idea and an idea repugnant to me. Why? Our organization is going to ICAS and will be underbidding the civilian teams because USPA is fronting all of the costs of ICAS and everything else, all done with membership dues! Dues that the soon to be outbid teams are paying too. What a betrayal! Obvious question: If this "soon to be put together team" is already competent; why do they need to go to a "camp"? (Oh yeah, this will be paid by USPA membership dues too) I think I know why. They don't even have PRO ratings, and USPA is going to pay them to get the rating! How nice. They can get thdir PRO ratings and do their first demo all at the same time. After just attending this camp, they will instantly be competent demo jumpers. This is obvious, because everyone knows that if you are great at 4 way or 8 way or swooping or style and accuracy, or freestyle, you are automatically a great demo jumper. Sure. Everyone knows that. Also, it states they will do "...fresh entertaining acts..." Not bad for a bunch of team members doing their first demo. I'd love to listen to the saleperson at ICAS selling this non existent team, and hear how great the team is going to be, once it is put together, and once it is put through a camp....yaddayadda. Ridiculous. I feel kinda ambushed at this point, as it is already a done deal. What were the board members thinking? The amount of our dues money that will be required will be huge and ongoing. And this, to further the nebulous goal of "promoting skydiving'? Sounds like a great investment of our dues money. According to the editorial in the October Parchutist, the team will consist of the "best competitors in virually all of the best competitors in virtually every skydiving discipline". Oh really? 4 way? 8 way? These are one trick ponies, by choice, and that is a good thing. That's how they win championships, and I respect and admire thdir skills. Even so, I doubt many even have PRO ratings. Or even want to do demos. So, the statement that the "team" will consist of champions" is phony baloney. (Note how the editorial shifts from the first paragrahs describing "champions", to simply "the best".)In order to be safe and successful, the team will have to be hand picked demo jumpers. If not we will have "champions" who don't know squat about doing demos. Newbies. So new they have to go to a camp to get their PRO ratings. This is a bad idea. A bad idea funded by our membership dues. It is just wrong.
  16. Is the Astra AAD still an item? I googled it and the last info was......uh 2008? I haven't seen one on a skydiver parachute, so I wondered if the product was still being used/sold to the sport market. I haven't called FXC or looked in the Para Gear catalog to see if it is available. Info on Astra use?
  17. Mark, re:(Helmet Cloth letter) "...the container would immediately open if only one loop cutter severered the loop." I'm not buying it. I doubt the spring in a Racer would actually extract the loop through the channel and free the pilot chute anyway. Probably just flop over on one side, with the loop still stuck in the channel. In theory it would work, but I have my doubts about any degree of reliability. Which begs the question of 'why is it necessary?' to double the complexity by having two electro mechanical devices (cutters) to begin with...and then try to invent a way to get around that problem - two cutters having to cut, instead of just one.
  18. pyromelon Could you give me your tele # so we can talk on phone about smoke mfg?
  19. Ubercris, I bought a brand new Raven 4 when they first came out a million years ago. Put about 5 jumps on it, and on three of the jumps, the pilot chute and D bag went in FRONT of the canopy on opening! Yes, they dangled over the nose and went in the lines or wherever, and caused me a lot of apprehension as they wormed thdir way between the lines and into everywhere, and dented the leading edge. I sent it back and the factory gave me a complete refund. My theory was that the attachment point was too far forward? Whatever; it happened. Hope that doesn't happen to you.
  20. The cost thing eh? Here's an old one."Want to know when somebady started skydiving?...Well ljust look out in the parking lot, and that will be the year of their car"
  21. Yup, might work, esp with a stiff and thick chafing strip under Any way, thanks to all of you guys with the better and more complete historical knowledge. My hat's off to you guys. Hopefully the fellow who was thinking of this has enough info to make his own decsion now.
  22. Don't think you could rely on a couple of hand tacks to prevent the L bars from "tipping" and the entire opening shock being taken on the little screws. I wouldn't. Especailly for those rigs that have two of the risers with the two thin 2500 lb risers. Having Butler cheerfully sew a special back container for a C9 would be more expensive than finding a complete used rig. This well-meaning fellow who started this question, is trying to be economical Also, every modern manufacturer sews mesh where the mod is cut from. For good reason. Just cutting an approved mod in a C9 and leaving the holes open (Even though I know we all did that for many years) risks the possibility of fabric blowing thru the mod. , which is obviously what the modern mfgs are preventing with the mesh. Old technology is still just that: old technology. I think the key is to contact the mfg of the harness and container and see if they would allow what is proposed, from cutting out mods to wierdo line stowng ideas, to converting rapides to L bars. I think all 4 mfgs would give the boot to all of these old ideas, and stick with what they are selling-and in the case of C9's I have only seen new modern rigs (2009 ParaPhernalia seat pack, Butler uh...2007 I think, seat packs), that I have recently packed in my loft, with 4 line releases. 4 line relaease was offered as an option on a new seat pack on display at a booth I visited at Osh Kosh 2011 two months ago. Would the same mfgs make a back assembly on a special order basis? I don't know, but I'll bet that even if they did, the canopies would be 4 line release only. I don't think any mfg would allow or presently or offer a cut out mod of any kind on a C9. And, I agree with Terry, 4 line r. would not be the steering system of choice for an untrained passenger. I think the C9 4 line release is simply a niche market for the old warbird guys, who want the same canopy they were trained on 30 years ago. And the mfgs are willing to go along with that, if the canopy is made steerable that way. I'm just going on what I have seen, as I haven't polled the mfgs to see what they would or could offer. In my opinion, bottom line is to buy a modern rig and forget the C9 idea.
  23. I thought I knew something about the civilian use of the vereable C-9 canopy. Turns out my knowledge is only rudimantary. I have about 200 jumps on modified C9's, have "cut out" (with a soldering iron -type woodburning tool), melting cutting T U and Hustler modifications for myself and jumping them. I also assumed that the military bail out assemblies were in the standard category and also thier components. Not sure they are now. Even so, this thread started out with a well-meaning guy who figured he coud start with a cheap C9 and get a (probably used) container and have an "aircrew" assemly on the cheap. Even though I have never seen any of the back versons, I doubt those containers are obtianable now, except in some old cardboard box in the back corner of an older loft. Now the thought of trying to attatch a C9 to a modern rig with rapide links, (56 550 lines on 4 rapide links?) or worse yet, getting a mfg's approval to retrofit risers to L bars to accommodate those lines, all combine to make the choice of a C9 an unwise and uneconomic choice. I agree that 4 line release would probably not be used by an untrained aircrew member, as the steps would be unfamiliar to the 'first look' user. My point, was to state that putting an unsteerable canopy in an aircrew container is not a good practice. If an aircrew assembly is put together and sold with the premise that "It probably never be used anyway", then when that rare use does occur, it may not actually not be lifesaving, if the user hits a power line, or a moving train. (Yes a parachitist was actually killed when hitting a moving train) I readily defer to those of you guys with in depth knowledge of C9 reserves with diapers, in Long Softies, etc., in back assemblies and with different kinds of line stowage devices. Your knowledge is beyond mine by a lot Yes the Butler manual states they WILL turn in any rigger installing an unsteerable canopy in one of thier rigs. You who rely on the internet for all of your info, may not find this, as it may not be in internet form. that's why I keep manuals, to supplement the internet sources.
  24. Oops got corrected. I guess the C9 canopy itslef isn't standard category, just the military harness and container.