-
Content
26 -
Joined
-
Last visited
Never -
Feedback
0%
Content Type
Profiles
Forums
Calendar
Dropzones
Gear
Articles
Fatalities
Stolen
Indoor
Help
Downloads
Gallery
Blogs
Store
Videos
Classifieds
Everything posted by Arcticanalog
-
Camcorder with superb image stabilization
Arcticanalog replied to olee's topic in Photography and Video
Let's see some footy! -
I bought a 135 loading it at 1.64. I clearly didn't know anything about good flare before getting underneath this wing. Transitioning from rears to toggles is an absolute pleasure. Just when I think I used everything up on the rears, the breaks make any swoop a nice soft step off the curb. I could never really get too much harness input on my sabre2 either. I can basically spiral this thing with my breaks stowed. The openings are in no way as bad as everyone says. I was terrified at first. I've put 100 jumps on it and it's only twisted up on me once which was definitely packing error. For the most part, despite the sometimes searchy-snivelly openings, they are on heading. I dig it and plan on jumping it for sometime to come.
-
Night jump shooting with stock flash on Rebel
Arcticanalog replied to Arcticanalog's topic in Photography and Video
Chems and strobe. Not that lit that up, just the requirements. Although...pyro would be sick. -
Night jump shooting with stock flash on Rebel
Arcticanalog replied to Arcticanalog's topic in Photography and Video
Anyone have any tricks and tips on how to utilize the stock flash on a canon rebel for night jumps? Settings and everything else? Thanks dudes! -
Harlem Shake, Skydive addition
Arcticanalog replied to shoeless_wonder's topic in Photography and Video
Is there any skydive subtraction? -
I've had my sl1 for 2 or 3 weeks and like it so far. Still gotta dial it in BIG time and definitely have years of learning ahead of me. The body is super light though. Battery is better than I anticipated. Sucks that the card/battery are on the bottom though...
-
In my hour of tunnel flying...I found myself more nervous than my first BASE jumps. Respect the tunnel. I saw a girl slam into the glass while carving on her head. Dislocated her shoulder. Crazy shit.
-
Tonfly 2xplus, hero3+, canon sl1, canon 10-22mm, pro mouth switch. Yiew!
-
Hey dude, I just got an Sl1 with a canon 10-22mm. My primary use is going to be for tandems but will also probably use it for freeflying and some ground stills. What do you recommend with this set up? Right now I'm at evaluative metering, AI servo (on burst), and Ive been playing around with the ISO and shutter speed. My first couple of shots haven't been that sharp but I'm working on it...
-
Canon EOS SL1 (smallest dslr) and T5i Released
Arcticanalog replied to trunk's topic in Photography and Video
TV and AI servo too right? thanks dude! -
Canon EOS SL1 (smallest dslr) and T5i Released
Arcticanalog replied to trunk's topic in Photography and Video
Just bought an SL1 and have a Canon 10-22mm on it. Definitely need some suggestions on ISO, shutter speeds for different lighting environments. I know there are other threads out there and I will look, but humor me if anyone on here has some good stuff they want to share. Thanks dudes. -
Buy yourself a c182 inspection port off ebay, drill a hole in it and mount a tripod mount on it or an adhesive. Screw the inspection port in. Enjoy.
-
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
it's a 170 so I'm assuming 2inches out of trim isn't going to kill me. Think i'm going to try and put at least another 100 jumps on it. Thanks for the input dudes. -
Canon EOS SL1 (smallest dslr) and T5i Released
Arcticanalog replied to trunk's topic in Photography and Video
So...has anyone jumped the SL1 yet? -
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
So I'm doing patches...yep. Thank you all for your input. PD says that its 2.5 inches out of trim and I should get it relined while i'm at it. What do you guys think? Is this a "you need new break pads" sort of thing? Should I wait until I really need a new line set or just go for it now? -
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
The cell doesn't have to be replaced. Just that top skin panel. Also have some tiny little puncture wounds on cell 2 and 3 (top skin) but i'm told a patch for those would be more detrimental for the canopy. Already got my buddy's Sabre2 packed up =] -
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
It snagged on some barbed wire. It has less than 200 jumps. I plan on keeping it for a while. -
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
I'm going try and upload a short video. Can you guys see this? http://tinypic.com/r/2s0mo7a/5 -
Tears on top skin. Patch it or replace the top skin panel?
Arcticanalog replied to Arcticanalog's topic in Gear and Rigging
Didn't hit the rib, all though it got some of that stitching. What would you guys do? Patch it or replace that panel of top skin? The difference is going to be roughly $80 vs. $240. Thanks! -
ha..ha...ha. Anyways yes. I'm stoked. We don't have to continue on this conversation very much longer. I've had a realization that gopro video is just going to keep getting better and better and that a still ontop is probably the avenue I'm going to go down. I'm glad the tonfly is so versatile for this stuff. yiewwww. Now I just need to find a good camera. cheers.
-
=[ Bummer. I don't want to get a PC. Do you lose any quality in the conversion/is it time consuming? Psht MTS...
-
Nah I did. I totally, totally would but it seems that most of the places I jump at really prefer cx100s and 150s for some reason. I think its sort of an obsolete technology but I don't know. I've always had trouble getting the files off of them (get stuck with that MTS bullshit). Does anyone know anything about these new ones with the "BOSS" stuff? I know there is a thread for this somewhere but humor me. Not sure if I can justify spending 600 something dollars on a new one..but then again I did just spend over that on a helmet.
-
I'm assuming you are flying on your belly with tandems right?
-
Thanks for the input dudes! Ya I imagine your neck must be all funky at the end of the day from more weight on one side...One more quick question. What's an awesome lens for the sony? I've seen a lot of cheap ones around on the internet but don't really want to cut any shortcuts.
-
Hey everyone, I hope yall don't chew me out immediately but I have a couple of questions. I was debating between a CC1 and a 2x plus for shooting tandems and eventually settled on a 2x plus. Plan on running a cx150 and a hero3 for photos. Does anyone have thoughts on this setup? I liked the idea of side mounting at first but I've heard a lot of talk about riser strike...What's everyone think? Is a top mount cx efficient in filming tandems? Thanks!