0
spencer

Here is Gopros reply to exposure lock problem, for what its worth

Recommended Posts

Sorry about the problems with exposure locking in the two shortest time lapse intervals. Would you believe that was intended as a feature and it's not a bug? My understanding is that some folks in the skydiving community asked for it, but since then we've heard lots of complaints from other skydivers, so we've asked the engineering folks to make it an option you can turn on or off.

For now be aware that in the two shortest time lapse modes, 0.5 and 1.0 seconds, the exposure will latch on to the values encountered at the first frame. For time lapse intervals of 2.0 seconds and longer each frame will be imaged using auto exposure.
Remember that if auto-exposure results in flickering you can improve and smooth out the assembled video by invoking the De-flicker filter from the Advanced Settings menu of our free Cineform Studio software.
Keep an eye on the forums and check in to the firmware update page every few weeks for when the update hits.
Thank you so much for your feedback.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0