0
sky-pimp

Post your GoPro set up

Recommended Posts

Used it for the first time last week. Got a nice tip from a friend: after deployment I tilt the camera down (while looking at traffic) to get a nice angle for canopy flight and landing.
I’m planning to attach one to the back of the helmet for wingsuit angles.
Engineering Law #5: The most vital dimension on any plan drawing stands the most chance of being omitted

Share this post


Link to post
Share on other sites

I have a RAWA but didn't want the Go-Pro on top so I drilled out the top rivet and used one of the plates that came with it and screwed it in with a locking screw. Kind of hard to see in this picture but it's significantly lower than the top. It works great HD or on my belly.B|


Katie
Get your PMS glass necklace here

Share this post


Link to post
Share on other sites
I use my GoPro for stills on handicam tandem jumps. It's mounted beside my CX100, in vertical orientation.

The mount is the plastic plate it came mounted on in the box from the store. I cut the plate to suit size of the glove inside, with a hole formed in the glove side. It all sits solid and no vibration.

The shots are well framed in the vertical orientation.

Ciao,

fergs

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0