Zlew 0 #1 July 1, 2010 In the next few weeks I am going to be upgrading my camera gear with new vid (stills to follow). I have a Half Rack that currently has a PC series camera side mounted in a D Box. My plan right now is to get a Cookie box/CX150 and Hypeye. From poking around on here and on youtube, I'm having trouble figuring out if I need to add a mounting plate (like a flatlock) to give the Hypeye room to plug in, or if flush mounting the box to the side of the Half Rack will work. Do any of you guys have a similar set up? Any suggestions? *edit- added a missing N :) Quote Share this post Link to post Share on other sites
sky490 0 #2 July 1, 2010 This is a new CX-150 Box I make, Mine is a Friction Fit but you still need about 1/2" for the Hypeye. You could carve into the helmet to clear the plug. Most Bonehead Helmets have 3/4 of an inch before you hit skin Good Luck Terry [email protected] Quote Share this post Link to post Share on other sites
Zlew 0 #3 July 2, 2010 I think I have enough room in the liner... We'll see. Amazon had 150's on sale tonight for about 40 bucks less than they were, so I put my order in. When I get it set up, I'll post pics. Quote Share this post Link to post Share on other sites
mrbiceps 0 #4 July 2, 2010 I know that the cookie cages were designed so that u had to drill a hole in the helmet and connect the hypeye through the inside of the helmet, pretty sure the same goes with the boxes Quote Share this post Link to post Share on other sites
