ReyNier 0 #1 June 3, 2010 Has anybody got a solution for a bite-, tongue- or blowswitch for a Panasonic Lumix GF1 ? The jack seems to be a standard 2.5mm pin but no remote (that I know) works with the thing. Thanks for info ... Quote Share this post Link to post Share on other sites
pilotdave 0 #2 June 3, 2010 Probably need to start with the panasonic remote switch (DMW-RSL1) and solder to the switch of your choice. Dave Quote Share this post Link to post Share on other sites
Peterkn 17 #3 June 3, 2010 This website: http://forum.lowyat.net/topic/601876 shows you how to make a DIY equivalent of the DMW-RS1 - not sure if this electrically the same as the one used by the GF1, but might be worth a try. Quote Share this post Link to post Share on other sites
ReyNier 0 #4 June 4, 2010 ' have done that already but the Panasonic switch has got fiber cables (3) and "our" switches have got 2. Can't solder the fiber to the "normal" cabels .... thanks anyway Quote Share this post Link to post Share on other sites
ReyNier 0 #5 June 4, 2010 Thx Peter, looks fantastic and might work ... I'm just not techy enough to follow that. Seems there is no easy solution for the case. The cam will have to do serial exposures ... thx Quote Share this post Link to post Share on other sites
divegoddess 0 #6 June 7, 2010 there are people modding these up right now...I just bought one....however I am having trouble deciding the best setting for jumping......tryingthe bitswitch today....tongue switch didn't seem to work very well....anyone jumping one of these right now? It's awesome to have this on my helmet.... it seems to respond........really..........slowly.......and I'm not sure if it's the switch or the camera settings..... Quote Share this post Link to post Share on other sites
