nakedfool 0 #1 May 19, 2010 i sent rawa an email regarding this, but have not received a response. i also searched the forums and couldn't find the answer. simple question: does the cx150/cx110 fit in the rawa helmet that i purchased about 8 months ago that is intended for the cx100? thanks for your help _NF Quote Share this post Link to post Share on other sites
Harmless 0 #2 May 19, 2010 I guarantee it will fit inside as the 110/150 is smaller all around than the 100... but since it is a friction system that holds the camera steady, you probably won't be happy with the camera moving around inside the box."Damn you Gravity, you win again" Quote Share this post Link to post Share on other sites
mrbiceps 0 #3 May 19, 2010 Maybe u can insert some sort of foam or padding into the box to stop it from moving around. Quote Share this post Link to post Share on other sites
Harmless 0 #4 May 19, 2010 Most likely... length is the same but HxW are 1/4 inch smaller in each direction."Damn you Gravity, you win again" Quote Share this post Link to post Share on other sites
nakedfool 0 #5 May 20, 2010 this doesnt really help. i guess i will go to best buy and test this out. i was looking for first hand experience, but i'm guessing there is none at this point.... stand by... Quote Share this post Link to post Share on other sites
chutingstar 1 #6 May 20, 2010 Rawa is now making a CX110/150 box, which we just received several of. I did try putting a CX150 in the CX100 Rawa box, and it is too loose. But you might be able to put some extra padding to make it work...or put the CX150 box on there. MikeChutingStar.com Quote Share this post Link to post Share on other sites
nakedfool 0 #7 May 20, 2010 thanks for the reply mike. you save me a trip to the electronic store. i'll look for the new box on your site. Quote Share this post Link to post Share on other sites