yuri_base 1 #1 June 19, 2007 When shooting with a wide angle lens on HC-1, the picture doesn't look solid when camera is shaking, it looks like a reflection off shaking water (different parts of the picture are moving/shaking at different speeds, giving it unpleasant "liquid" appearance). What causes this? Is this effect caused by electronic image stabilization shifting the picture as a whole and nonuniform distortions from wide angle? Any way to fight this effect other than switching IS off? (setting "wide angle" option in the menu doesn't help) The effect can be clearly seen in this video (shot with some other camera) at about 7:07: http://www.youtube.com/watch?v=qNpcxDytqpAAndroid+Wear/iOS/Windows apps: L/D Vario, Smart Altimeter, Rockdrop Pro, Wingsuit FAP iOS only: L/D Magic Windows only: WS Studio Quote Share this post Link to post Share on other sites
jtval 0 #2 June 19, 2007 not that I would have a clue, but that video doesn't so much. since you had to compress it all I could see was the pixelization. didn't see any major liquid effect. okay I did see it around the 7 minute mark. Are you sure the tape wasn't crapping out on you? it loos as if you hit a bad spot in the tape. has it been setting in the sun? is it old? have you used it more than once?My photos My Videos Quote Share this post Link to post Share on other sites
yuri_base 1 #3 June 19, 2007 it's not my video, so I don't know the technical details of it.Android+Wear/iOS/Windows apps: L/D Vario, Smart Altimeter, Rockdrop Pro, Wingsuit FAP iOS only: L/D Magic Windows only: WS Studio Quote Share this post Link to post Share on other sites